X

192.168.0.1 Admin login – Configure

How to config Wifi Router Default IP Number 192.168.0.1, 192.168.0.1.1, 192.168.2.1, 10.0.0.1, 192.168.1.254, 192.168.1.2 or 192.168.1.1 with admin login and complete setup for PPPoE, Bridging, WLAN Setting, Advanced Settings and etc..
Cisco Linksys, Netgear, TP-Link, D-Link, Asus, Apple AirPort Extreme Wifi Routers will have private IPv4 network address is 192.168.1.1 or 10.0.0.1. default gateway to create the home or small office user ID passwords, the leading router manufacturers of D-Link or Netgear brands made the IP 192.168.0.1 next to IP 192.168.1.1 and IP 192.168.2.1.

192.168.0.1 – How to Login to Configure


Log in to the device and config your settings and change Username and Password for Wifi.

How to Change Admin ID and Password in 192.168.0.1 and Configure other settings

Once you have login successfully, you can change your router Admin ID and Password at control panel configuration page, select the password change option and change your password and save, that it.

After Successful Login, you can able to change settings for PPPoE, Bridging, WLAN Setting, Advanced Settings please read user guide of your Wifi router to make changes.

Methods to obtain a Router’s IP address from different Devices:
Before getting in-depth on the topic, let’s understand what an IP address is.
I. What is an IP address?
Basically, an IP address (Internet Protocol Address) is a unique set of digits which are separated by using full stops between them. The IP address recognizes each device (computer, mobile, router, etc) that is utilizing the internet protocol (IP) to communicate over a network.
II. What is a Router’s IP address?
A router’s IP address is simply a default gateway in a specific network connection. This web-based page allows the user to make certain changes to the router’s settings. Some of these include changing username and password, viewing or blocking a specific device connected to the router, viewing the data usage (approximate use), updating the router’s software, etc.
Most of the time, you would require a Username and password to access this information. Unless and until they are changed, they would remain the same as your router’s default username and password.
III. Different ways to obtain your wireless router’s IP address:
Usually, the router’s you purchase has two distinct ID addresses. They are:
i. Local Area Network: Local area Network or abbreviated as LAN is a type of network that is utilized on Internal Networks.
ii. Wide Area Network: Wide area Network or abbreviated as WAN is a type of network that is utilized for connecting online the best.
1. Router’s IP address – Ways to detect on Windows:
Basically, there are two different methods to do this on an OS like Windows. The first one is by using the Inbuilt Command Prompt (CMD) and entering the term ‘IP config’. The second method is following certain steps:

2. Router’s IP address – Ways to detect on Apple Devices:
On Apple devices like iPhone, iPad, and iPod, the method is little different but easy:

3. Router’s IP address – Ways to detect on Mac OS X:

That’s all. You must have understood what an IP address is, the different type of address in a router and how to find it on various devices which we commonly use.

Troubleshooting problems associated with Internet Protocol (IP)
Basically, IP is an agreement or protocol by which data is transferred via the Internet between two different devices (computer, mobile, laptops, etc). Each device has a unique IP address on an Internet. It is through this IPs that a device or computer is recognized on the Internet. The IP address usually ranges from 192.168.0.0 to 198.168.255.255.

Often, users encounter various problems and issues related with IPs. The most common problem which users face is IP conflict. It’s a condition where two devices have the same IP address and one of the devices won’t be able to get any connection. So without waiting, let’s learn the issues which users face when it comes IPs and how to solve or troubleshoot them.

Fixing Problems associated with IP address:

i. What is 192.168.0.1?
As we all know, the IP address ‘192.168.0.1’ is a default IP that is utilized by most broadband routers like D-link, Netgear, etc for the purpose of configuring routers. Some other addresses like ‘192.168.2.1 ‘ and ‘192.168.1.1’ are used in other brands of routers. Also, as we mentioned, a specific IP address can only be used by a single device that is connected to a network.

So, in cases where two devices try to use one IP (like 192.168.0.1), a problem known as IP conflict occurs and the user may encounter error messages like ‘The device has failed to connect via the internet browser’ or ‘The computer fails to connect to the network’. So let’s learn how to fix this conflict:

1. The configuration of Routers:
At times for configuring routers, users may be unable to connect to their router’s default IP address. So if you ever encounter such problems, you may use the following steps to troubleshoot it:

2. Resetting Routers to default settings:
To reset your router to its default settings, you must first know your default IP address or default gateway. If you are familiar with the IP, directly skip the first and second steps and go to the third step, from the ones that are mentioned below:

There you go, this entire content explained the need of an IP address, problems faced with IP address and how to troubleshoot them

Configuring a factory default Router
The revolution brought about by ‘Internet’ is massive and is still continuing to be something bigger. Nowadays, almost everything uses the Internet. The Internet helps us to find and gather knowledge on various matters. The Internet has turned to be a daily necessity for every human being. It’s pretty sure that the world without Internet is difficult, tiring and boring. So to get access to the internet on multiple devices simultaneously, we all use routers in our home, offices, etc. Let’s learn how to access a router and related things.

I. Accessing the Router’s configuration settings:
As we all know, each router has a default IP address (example: 192.168.0.1) which is used for configuring it and making appropriate changes to its settings and working. You may also use this page for troubleshooting common issues like failing or unresponsiveness of router, unable to access the internet or IP problems. You can follow the steps which are mentioned below if you are unable to access your router’s default IP address:

II. Ways to find your router’s default IP address:

Apart from these steps, if you have your router’s manual still with you, you may check it out to find out its default IP address. If have lost it by somehow, there is nothing to worry as you can either follow the above steps or visit your router’s manufacturer’s website.
III. Resetting a router:
If you are planning to reset your router to its default configuration, you may follow the simple steps mentioned below:

There we come to an end. You must have learned the common issues faced with routers, how to configure a router, finding your default IP address and last but not the least, how to reset your router to its default settings.

Resetting a router’s forgotten Username and Password
Forgot your router’s username and password? Planning to throw the router and purchase a new one? Just wait, don’t throw it already. There is a very simple method which you can follow to reset the forgotten username and password of your router.

If you are facing a different scenario like, someone hacked into your router and has been using your data for a long time. You can solve all these issues by changing your current username and password. The second scenario which is mentioned above usually occurs when you continue to use your default username and password without changing it to a new one making it vulnerable to hackers.

I. Steps to reset your Router’s Username and Password:
Worrying with a forgotten username and password? Don’t worry; we have got your back. You must have set these when you must have purchased the router; with time, people forget such details if they don’t change at regular intervals. It’s also mandatory to change your default username and password to something else or else, hackers might have a good time using your connection. By following some easy steps mentioned below, you can reset your router’s username and password:

There you go you just saved yourself from wasting your hard earned bucks on buying a new router simply. You also learned how to change your default username and password to something new to avoid hackers from using your connection and wasting your data plan.

Gaining access to your router’s configuration page:
Have no idea to access your router’s configuration page via your default IP address. Don’t worry, after reading this content, you will go back with all the knowledge you require on this topic.

I. What is a default IP address and what are its uses?
Basically, a default IP address is something you enter into your web browser to get access to your router’s configuration page. Using this IP address, the administrator can tweak his router, monitor and set up the LAN network and change the manufacturer’s settings. The most commonly used default IP address is ‘192.168.0.1’ and is the default IP address of many broadband router manufacturers like Netgear, D-link, etc.

II. Getting access to the Configuration Page:
Following these simple steps, you can have access to your router’ configuration page:

III. IP Conflict:
Basically, the private IP address of a network can only be connected to a single device. The same IP address can’t be used by two devices sharing a single network. Such situation leads to something called IP conflict. In such cases, either any of the two devices or both the devices might not have any access to the internet. However, the same IP address can be utilized in two different networks.

In this content, we have learned how to get access to the router’s configuration page via the default IP address. We also learned about IP conflict and the problem it causes.

A Guide to Wireless Routers
I. What are Wireless Routers?
Basically, the main function of a wireless router is to allow multiple devices to connect to a network simultaneously. A wireless router works by transmitting packets of data between devices. These data packet transmissions are carried out securely.

The wireless router has gained wide popularity as it’s easy to use and allows a large number of users to enjoy the network at a time. It’s also replacing the wired routers which have no wireless functions. These routers are equipped with an easy to use configuration page allowing the owner to tweak the settings to his/her preference.

II. Configuring and setting up a Wireless Router:
You can access a router’s configuration page using the default IP address of a router. This is usually set by the Manufacturer. The commonly used ones are 192.168.1.1 (Linksys), 10.0.11 (Apple) and 192.168.0.1 (D-link, Netgear, etc). Below are few steps to follow to configure and setup your wireless router for use:

After logging in, you land on the main dashboard which has a bunch of settings. You can alter these to your preferences.
The most commonly used functions include:
1. Setup: With this option, you may change your network’s SSID, wireless password, time, date, etc. With some wireless routers, users are given an automatic or manual wizard to choose from and setup their router.
2. Status: This option is just an indicator to show whether you are ‘connected’ or ‘disconnected’ from the network.
3. Maintenance: This option allows the user to tweak the main settings of the router. This includes the username and password of the administrator. It also shows the recently or currently connected devices to the network along with their details like IP address, etc. Some router also allows the administrator to block certain devices from connecting to the router without the need of changing the wireless password. You also have the choice to back up your settings for later needs.
4. Advanced: In this option, important settings like WAN, LAN, IP, etc., can all be set. You can also make any IP static or dynamic according to your wish. Altering these settings is usually required if many devices use the router.
5. Help: In case, you encounter some issue while setting up your network or router, you may utilize the ‘Help’ section to solve your problems and clear your doubts regarding the issue.
That’s all from this content. You must have clearly understood the benefits if using a wireless router. You also learned how to access the configuration page of wireless routers. You also came across different settings that can be tweaked in the configuration page.