• Skip to main content

192.168.0.1

192.168.0.1 Setting

192.168.0.1 Aceex Router Admin Login & Password Change

January 7, 2021 by 192.168.01 Leave a Comment

192.168.0.1 Aceex Router Admin Login & Password Change Complete Setup: Aceex is a formidable brand when it comes to Wireless router and there is quite a wide range of models available in the market. It is well known for making competitive wireless computer network solutions that are useful for the house, small office and warehouses houses as well. In this article today we will be covering the web module of Aceex 11n AP router which has sold well across the world and is known for highspeed performance as well.

Please note that, all the routers from this brand will follow the same configuration and installation process. If you have one of these routers, then you at first need to login to the admin page and then configure it to work as Wireless. In the guide below we will show you those steps.

192.168.0.1 Accex WiFi Router Admin Login
192.168.0.1 Accex WiFi Router Admin Login

How to login to Aceex Wireless Router– WLAN Interfacing Steps:

Before we continue, we need to make sure that the router is connected properly to the PC or laptop, so that the configuration is carried out without any errors.

  • The ethernet main wire should be connected to the Aceex Wireless router which we will be used for configuration
  • The Aceex router should be connected via a power supply
  • Then a PC or a laptop should be connected to the same router for accessing and configuration

Software Instructions – Aceex Router Setup & Configuration Steps:

Now let us dive into the main steps which involve the software configuration part of the router and mainly the important part where you can configure the router as per your preference.

Step 1 – IP Configuration in Browser

Every router brand has an IP address associated with the model or product through which we can access the admin page. Aceex also has a default IP address which is 192.168.0.1 and you can enter this IP address in the browser to continue.

192.168.0.1 Admin Login
192.168.0.1 Admin Login

Step 2 – Default Username and Password

Once you enter the IP address 192.168.0.1 in the browser address bar, then a new popup will appear asking to enter the login details.

  • Aceex router has default username and password set to admin as both, which you have to enter into the login details and click on the ok button to continue

Step 3: Wireless Network Configuration

We have now completed the login process which is basically the same for any router and quite easy to go through as well. But the main configuration now is to setup wireless network on the Aceex router which you can complete from the below steps.

198.168.0.1 WAN Settings
198.168.0.1 WAN Settings
  • On the homepage, select language as “English” click apply
  • Under “Internet Settings” click on it and you will have to select “WAN” under it as well
  • Next, in the “WAN Connection Type” we have to select the mode to PPPoE(ADSL) and then click on the apply button to continue

After that Wi-Fi will be enabled and Wi-Fi username, password reset page will appear where we can select the username and also the password. While the MAC Clone enabled will be set to disable and then click on the Apply button to finish.

Default Username and Passwords in Model Wise for Aceex WiFi Router for Admin Login & Password Change

BrandModelProtocolUsernamePassword
ACEEXMODEM ADSL ROUTERHTTPadmin(none)
ACEEXMODEM ADSL ROUTERHTTPadmin(none)
Aceex Router Default Admin & Password

Filed Under: 192.168.0.1 Setting, Admin, Login, Password Change

192.168.0.1 Admin login, Password – Configure

January 7, 2021 by 192.168.01 Leave a Comment

How to config Wifi Router Default IP Number 192.168.0.1, 192.168.0.1.1, 192.168.2.1, 10.0.0.1, 192.168.1.254, 192.168.1.2 or 192.168.1.1 with admin login with Default Password and complete setup for PPPoE, Bridging, WLAN Setting, Advanced Settings and etc..

The Wi-Fi routers have IPv4 private network IP address or default gateway such as Cisco Linksys, Netgear, TP-Link, D-Link, Asus, Apple AirPort Extreme, Private IPv4 network address is 192.168.1.1 or 10.0.0.1. to config the WiFi routers enter defalt IP address 192.168.1.1 on your web browser where create the home or small office user ID passwords and manage routers settings, the leading router manufacturers of D-Link or Netgear brands made the IP 192.168.0.1 next to IP 192.168.1.1 and IP 192.168.2.1.

192.168.0.1 – How to Login to Configure

  • Connect the Internet Ethernet Cable to your Wifi Modem
  • Then check your modem is switched on and connected cable, everything fine?
  • Then open your web browser and enter the default IP address as a web address http://192.168.0.1/
  • Then you have seen the admin login page as per bellow image
  • After the above step login with using User ID and Passwords.
  • The Default User ID and Password available at bottom of your device please check the image.
192.168.0.1 Admin ID and Passwords


Log in to the device and config your settings and change Username and Password for Wifi.

How to Change Admin ID and Password in 192.168.0.1 and How to Configure other settings

Once you have login successfully using above simple process, you can change your router default admin ID and Password at control panel configuration page, select the password change option and change your password and save, that it. After Successful Login, you can able to change settings for PPPoE, Bridging, WLAN Setting, Advanced Settings please read user guide of your Wifi router to make changes.

World’s leading top brands of Router and the Username and Password List by model number

To log in with the types of IP address list as Given:

 

Methods to obtain a Router’s IP address from different Devices

Here we explain or giving information about how to obtain routers IP address form different devices, so follow below procedure to get routers IP address through your computer.

I. What is an IP address?

Generally, an Internet Protocol address (IP Address) is a unique set of digits which are separated by using full stops between the digits, nowadays IP address recognizes each device and every device such as computer, mobile, router, etc., that is utilizing the internet protocol (IP) to communicate with other networks.

II. What is a Router’s IP address?

A router’s IP address is simply a default gateway in a specific network connection. This web-based page allows the user to make certain changes to the router’s settings. Some of these include changing username and password, viewing or blocking a specific device connected to the router, viewing the data usage (approximate use), updating the router’s software, etc.

Most of the time, you would require a Username and password to access this information. Unless and until they are changed, they would remain the same as your router’s default username and password.

III. Different ways to obtain your wireless router’s IP address:

Usually, the router’s you purchase has two distinct ID addresses. They are:

  • Local Area Network: Local area Network or abbreviated as LAN is a type of network that is utilized on Internal Networks.
  • Wide Area Network: Wide area Network or abbreviated as WAN is a type of network that is utilized for connecting online the best.

Router’s IP address – Ways to detect on Windows:

Basically, there are two different methods to do this on an OS like Windows. The first one is by using the Inbuilt Command Prompt (CMD) and entering the term ‘IP config’. The second method is following certain steps:

  • Go to ‘Control Panel’ using the start button.
  • Under the title ‘Network and the Internet’, you can find another subtitle that says ‘View the status and tasks’. Click on that subtitle.
  • Now, click on the name of your connection which leads to a popup-window. Now you can click on ‘details’ that is present in the window. Another pop-up window appears and this will show your IP address named as ‘IPv4 Default Gateway’.

Router’s IP address – Ways to detect on Apple Devices:

On Apple devices like iPhone, iPad, and iPod, the method is little different but easy:

  • Go to your device’s settings.
  • Tap on Wi-Fi. Tap on your networks’ SSID (name) that you are connected to.
  • A pop-window will display the router’s IP address.

Router’s IP address – Ways to detect on Mac OS X:

  • On the menu bar situated at the top, click on the icon which resembles the Apple logo.
  • On this window, navigate to ‘System Preferences’ and click on the icon which resembles ‘Network’.
  • Now select the network which you are connected to and navigate to the button located at the bottom that says ‘Advance’.
  • Now, click on the Tab that says “TCP/IP”. On this Tab, you will be able to see your Router’s IP address.

That’s all. You must have understood what an IP address is, the different type of address in a router and how to find it on various devices which we commonly use.

Troubleshooting problems associated with Internet Protocol (IP)

Basically, IP is an agreement or protocol by which data is transferred via the Internet between two different devices (computer, mobile, laptops, etc). Each device has a unique IP address on an Internet. It is through this IPs that a device or computer is recognized on the Internet. The IP address usually ranges from 192.168.0.0 to 198.168.255.255.

Often, users encounter various problems and issues related to IPs. The most common problem which users face is IP conflict. It’s a condition where two devices have the same IP address and one of the devices won’t be able to get any connection. So without waiting, let’s learn the issues which users face when it comes IPs and how to solve or troubleshoot them.

Fixing Problems associated with IP address:

What is 192.168.0.1?

As we all know, the IP address ‘192.168.0.1‘ is a default IP that is utilized by most broadband routers like D-link, Netgear, etc for the purpose of configuring routers. Some other addresses like ‘192.168.2.1 ‘ and ‘192.168.1.1‘ are used in other brands of routers. Also, as we mentioned, a specific IP address can only be used by a single device that is connected to a network.

So, in cases where two devices try to use one IP (like 192.168.0.1), a problem known as IP conflict occurs and the user may encounter error messages like ‘The device has failed to connect via the internet browser’ or ‘The computer fails to connect to the network’. So let’s learn how to fix this conflict:

The configuration of Routers:

At times for configuring routers, users may be unable to connect to their router’s default IP address. So if you ever encounter such problems, you may use the following steps to troubleshoot it:

  • Using the start menu, navigate to the network icon and select properties by right clicking on the icon.
  • Click on ‘View Status of your LAN connection’.
  • Go to properties and select Internet Protocol (TCP/IPv4).
  • From here, you may automatically set an IP address or enter your own new IP address.
  • Just leave the ‘Subnet Mask’ at 255.255.255.0 and you enter ‘192.169.1.1′ for getting access to the default gateway.

Resetting Routers to default settings:

To reset your router to its default settings, you must first know your default IP address or default gateway. If you are familiar with the IP, directly skip the first and second steps and go to the third step, from the ones that are mentioned below:

  • Using the start menu, go to either Command Prompt or Run, type in ‘ipconfig‘ and press enter.
  • You will be able to view your default IP address named as ‘Default Gateway‘. Memorize or copy this address and go to it on a browser to access your router’s configuration page.
  • Now you can press and hold (for 30 to 35 seconds) the reset button present on your router until it reboots.
  • Now your router is reset to its factory default settings and if you want, you can change the SSID (name) and password using the configuration page.

There you go, this entire content explained the need for an IP address, problems faced with IP address and how to troubleshoot them

Configuring a factory default Router

The revolution brought about by ‘Internet‘ is massive and is still continuing to be something bigger. Nowadays, almost everything uses the Internet. The Internet helps us to find and gather knowledge on various matters. The Internet has turned out to be a daily necessity for every human being.

It’s pretty sure that the world without the Internet is difficult, tiring and boring. So to get access to the internet on multiple devices simultaneously, we all use routers in our home, offices, etc. Let’s learn how to access a router and related things.

Accessing the Router’s configuration settings:

As we all know, each router has a default IP address (example: 192.168.0.1) which is used for configuring it and making appropriate changes to its settings and working. You may also use this page for troubleshooting common issues like failing or unresponsiveness of router, unable to access the internet or IP problems. You can follow the steps which are mentioned below if you are unable to access your router’s default IP address:

  • Using the start menu, navigate to the network icon and select properties by right clicking on the icon.
  • Click on ‘View Status of your LAN connection’.
  • Then go to properties and select Internet Protocol (TCP/IPv4).
  • From here, you may automatically set an IP address or enter your own new IP address.
  • Just leave the ‘Subnet Mask’ at 255.255.255.0 and you enter ‘192.169.1.1‘ for getting access to the default gateway.

Ways to find your router’s default IP address:

  • Using the start menu, go to ‘Network’.
  • Navigate to your router’s icon and select properties by right-clicking on the icon.
  • A pop-up window will appear. From here, you can go to the network device tab.
  • From the tab, go to Troubleshooting information section where you will be able to see your router’s default IP address.

Apart from these steps, if you have your router’s manual still with you, you may check it out to find out its default IP address. If you have lost it by somehow, there is nothing to worry as you can either follow the above steps or visit your router’s manufacturer’s website.

Resetting a router:

If you are planning to reset your router to its default configuration, you may follow the simple steps mentioned below:

  • Using the start menu, go to either Command Prompt or Run, type in ‘ipconfig‘ and press enter.
  • You will be able to view your default IP address named as ‘Default Gateway‘. Memorize or copy this address and go to it on a browser to access your router’s configuration page.
  • Now you can press and hold (for 30 to 35 seconds) the reset button present on your router until it reboots.
  • Now your router is reset to its factory default settings and if you want, you can change the SSID (name) and password using the configuration page.

There we come to an end. You must have learned the common issues faced with routers, how to configure a router, finding your default IP address and last but not the least, how to reset your router to its default settings.

Resetting a router’s forgotten Username and Password to Default Username and Password

Forgot your router’s username and password? Planning to throw the router and purchase a new one? Just wait, don’t throw it already. There is a very simple method which you can follow to reset the forgotten username and password of your router.

If you are facing a different scenario like, someone hacked into your router and has been using your data for a long time. You can solve all these issues by changing your current username and password. The second scenario which is mentioned above usually occurs when you continue to use your default username and password without changing it to a new one making it vulnerable to hackers.

Steps to reset your Router’s Username and Password:

Worrying with a forgotten username and password? Don’t worry; we have got your back. You must have set these when you must have purchased the router; with time, people forget such details if they don’t change at regular intervals. It’s also mandatory to change your default username and password to something else or else, hackers might have a good time using your connection. By following some easy steps mentioned below, you can reset your router’s username and password:

  • Press and hold the reset present on your router for about 10 to 30 seconds or until it restarts. In some routers, the button might be very tiny making you use a pin or something to press and hold it. After rebooting, your router is all set to it’s default factory settings.
  • Now, as you have reset your router, connect it to a computer via an Ethernet cable to configure it. Most of the routers out there have a web-based configuration page which you can access by entering the default IP address.
  • Some routers have additional protection making it impossible to access the configuration page of your router wirelessly and access is only granted when the connection is made via an Ethernet cable to a PC or laptop.
  • To access the configuration page, enter your router’s default IP address into the address bar of your browser. You may look for this address in your router’s manual, manufacturer’s website or just Google it.
  • Some commonly used ones are 192.168.1.1 (Linksys), 10.0.11 (Apple) and 192.168.0.1 (D-link, Netgear, etc).
  • After landing on the page, the page will demand the default administrator’s login name (mostly its ‘admin’) and password. You can also find this in your router’s manuals, manufacturer’s website or just Google it.
  • Go to the settings page where you can change the password to something better and strong. You can also tweak some additional features of your router or block some users from getting access to the router. In case if you want to change your router’s SSID (name), you may also find an option to change that in this configuration page.

There you go you just saved yourself from wasting your hard earned bucks on buying a new router simply. You also learned how to change your default username and password to something new to avoid hackers from using your connection and wasting your data plan.

Gaining access to your router’s configuration page:

Have no idea to access your router’s configuration page via your default IP address. Don’t worry, after reading this content, you will go back with all the knowledge you require on this topic.

I. What is a default IP address and what are it’s uses?

Basically, a default IP address is something you enter into your web browser to get access to your router’s configuration page. Using this IP address, the administrator can tweak his router, monitor and set up the LAN network and change the manufacturer’s settings.

The most commonly used default IP address is ‘192.168.0.1’ and is the default IP address of many broadband router manufacturers like Netgear, D-link, etc.

II. Getting access to the Configuration Page:

Following these simple steps, you can have access to your router’ configuration page:

  • Establish a connection between the router and PC (or laptop) via an Ethernet cable.
  • After connecting, go to any web browser and type in your default IP address. After the page loads, you will be asked to enter the administrator’s username and password. So just enter those.
  • If you don’t know these details, you may refer your router’s manual, manufacturer’s website or just Google it; Google will never disappoint you.
  • In case if it fails, it’s probably because the connection is not proper. Just reboot your router and re-establish the connection. Also, just recheck the password as it might be case sensitive.
  • If it fails again, try disabling your Windows’ network Firewall and try again. Also, ensure that the username and password are not changed from the default ones. In case, if it’s changed and you don’t remember, try resetting the router.

III. IP Conflict:

Basically, the private IP address of a network can only be connected to a single device. The same IP address can’t be used by two devices sharing a single network. Such a situation leads to something called IP conflict.

In such cases, either any of the two devices or both the devices might not have any access to the internet. However, the same IP address can be utilized in two different networks.

In this content, we have learned how to get access to the router’s configuration page via the default IP address. We also learned about IP conflict and the problem it causes.

A Guide to Wireless Routers

I. What are Wireless Routers?

Basically, the main function of a wireless router is to allow multiple devices to connect to a network simultaneously. A wireless router works by transmitting packets of data between devices. These data packet transmissions are carried out securely.

The wireless router has gained wide popularity as it’s easy to use and allows a large number of users to enjoy the network at a time. It’s also replacing the wired routers which have no wireless functions. These routers are equipped with an easy to use configuration page allowing the owner to tweak the settings to his/her preference.

II. Configuring and setting up a Wireless Router:

You can access a router’s configuration page using the default IP address of a router. This is usually set by the Manufacturer. The commonly used ones are 192.168.1.1 (Linksys), 10.0.11 (Apple) and 192.168.0.1 (D-link, Netgear, etc). Below are few steps to follow to configure and set up your wireless router for use:

  • Connect the router to a desktop or Laptop via an Ethernet cable. For this to work, you might require LAN drivers pre-installed.
  • After establishing the connection between your router and desktop, enter your router’s default IP address onto the address bar of your favorite browser. You will soon be taken to your router’s configuration login page.
  • You will be asked to enter the default username and password. You may find this in your router’s manual, manufacturer’s website or just try googling it. It’s highly recommended that you change the username and password once logged in to avoid hacking or other issues.

After logging in, you land on the main dashboard which has a bunch of settings. You can alter these to your preferences.

The most commonly used functions include

1. Setup: With this option, you may change your network’s SSID, wireless password, time, date, etc. With some wireless routers, users are given an automatic or manual wizard to choose from and set up their router.

2. Status: This option is just an indicator to show whether you are ‘connected’ or ‘disconnected’ from the network.

3. Maintenance: This option allows the user to tweak the main settings of the router. This includes the username and password of the administrator. It also shows the recently or currently connected devices to the network along with their details like IP address, etc.

Some router also allows the administrator to block certain devices from connecting to the router without the need of changing the wireless password. You also have the choice to back up your settings for later needs.

4. Advanced: In this option, important settings like WAN, LAN, IP, etc., can all be set. You can also make any IP static or dynamic according to your wish. Altering these settings is usually required if many devices use the router.

5. Help: In case, you encounter some issue while setting up your network or router, you may utilize the ‘Help’ section to solve your problems and clear your doubts regarding the issue.

That’s all from this content. You must have clearly understood the benefits if using a wireless router. You also learned how to access the configuration page of wireless routers. You also came across different settings that can be tweaked in the configuration page.

Filed Under: 192.168.0.1 Login Configure, 192.168.0.1 Setting, IP Routing

What to do if you Can’t login to Your Wireless Router with 192.168.0.1?

January 7, 2021 by 192.168.01 Leave a Comment

While we are using a router we may encounter some problems in those the main and very important problem is that a user can’t log in to his/her wireless router and What to do if you Can’t log in to Your Wireless Router….

Every router have a web-based interface where you can change or modify router default settings, so if you want to change some settings in your router you have to first login in to router through web-based interface, so with this web-based interface we can manage name of your network, the password, the security level, create a guest network, and set up or change a variety of other options and etc., but What to do if you Can’t log in to Your Wireless Router?

The above situation occurs when an user enter 192.168.0.1 in the browser address bar the user can’t go directly into the management page and the browser displays a login page and even though we use username and password the browser doesn’t go to management pages, this means you can’t connect to your router, now we will discuss about how the problem arises and how to troubleshoot? and What to do if you Can’t login to Your Wireless Router?.

What to do if you Can’t log in to Your Wireless Router

  1. Check connections between terminals of computers and routers
Wireless Router with 192.168.0.1

First of all Check whether your computer is connected to wireless router or wired router , If it is with wire router it is easy to solve the problem, so we need to see whether the notification lights on router and the light at the computer’s cable port is blinking or not, If anyone of device signal lights are not blinking then there is a chance of break in the cable or wire is not connected properly, so first check the cable and then plug into computer and router if the system is connected to router leave it and if again cable lights are not blinking that means the network cable is broken.

If a user using a wireless router then first the user to check whether the router is working properly or not, you can’t connect to your wireless router even router’s antenna is damaged also causes problems, antenna gives the strong signal if it is erect.

  1. Check your computers IP address

Each connected devices have one IP address assigned by the router, if the IP address of your computer is changed then your IP address, not in the router’s local area network then the user couldn’t connect to the router.

How to set computers IP address correctly

No matter which system an user is using may be MAC or PC, because your PC is automatically obtained IP address within routers network due to PC should be set to an auto addressing option named as ‘Obtain an IP address automatically’, in windows system first user should find ‘local area connection and get into properties and then get into TCP/IP(internet protocol) choose to get ‘obtain an IP address automatically’, now the computer tries to get IP address within the router’s network.

Above Process is similar for any system. A user cannot or should not set IP by himself.

  1. Check your routers login address 192.168.0.1

Every router is manufactured with a default gateway address also called as routers IP address as 192.168.0.1 or 192.168.1.1. Even there are some exceptions, for example, 2 wire’s router default address is 192.168.1.254. And if the router of popular companies then the IP address is 192.168.0.1 or 192.168.1.1, we can check the default gateway address or IP address of the router at back side of the router.

  1. Change your computer or browser

Even your network is ok sometimes your system’s browser stop working smoothly. This means your router is working properly. So, log in the router management page by using the username and password. if you don’t change the default username and password see at the back of the router for the username and password. If there is no username and password then google it with the brand and model names.

  1. Forgot router’s password

Sometimes your browser stops working properly even your network is working properly, this means your router is working properly, so login the router management page by using the username and password. if you have not changed the default password of the router at yet then see at the back of the router for the username and password. If there is no username and password then google it with the brand and model names.

  1. Reset your router

Many people will do this Restarting or resetting the router when they forgot their username or password, by this resetting router the router status gets back to normal and the router’s software is renewed so that it does not lose packets.

It is very simple to reset, take a needle and press into the hole which is near the power button. If the light at power port blinks then the router is reset and it is ready to change settings but before power on the router.

The above steps solve the problems of any login issue, routers problem or network problem and we explain clearly What to do if you Can’t log in to Your Wireless Router

Filed Under: 192.168.0.1 Login Configure, 192.168.0.1 Setting, IP Routing, Troubleshooting

192.168.0.1 Fujitsu Siemens Router Admin Login Password Change

December 15, 2020 by 192.168.01 Leave a Comment

Fujitsu Siemens Router Setup: Fujitsu Siemens is a part of the Fujitsu brand which is widespread all across the world with such exceptional presence in every industry and field. But with Fujitsu Siemens both combing, it has become a great success for them and for the fans as well since they’ve got some great router products out of this brand.

Similar to any other brand, their key market was the Networking and the computer industry while the router was a huge success for them because they were great at performance in terms of speed and bandwidth effective use as well.

Fujitsu Siemens Router Admin Login Password Change
Fujitsu Siemens Router Admin Login Password Change

How to configure Fujitsu Siemens Router – Fujitsu Siemens Setup Process

Fujitsu is a huge brand across the world and with the router industry, its release of Fujitsu Siemens has been exceptional. In that context, we will be showing you the step by step process to configure the router from this brand.

  • First, we will have to open the Fujitsu Siemens Internal IP address from the address bar of the router
192.168.0.1 Admin Login
192.168.0.1 Admin Login
  • So, enter IP address 192.168.0.1 into the address bar of your preferred browser from either laptop or computer connected to the router via an ethernet connection and cable
  • Once we click enter, a pop will appear where we will be asked to enter the login details to continue forward
  • In order to do this, simply enter the user as admin and the password also as admin which will be same for any other router under this brand
  • Once we are done, we need to click on the login button and now the admin panel will load in a few minutes.

Since we have access to the admin panel, we can now move towards the configuration part of the router which will be shown below.

  • Click on the Advanced Setup icon at the right of the admin panel since this will be a complete configuration process
 Fujitsu Siemens Router Advanced Setup
Fujitsu Siemens Router Advanced Setup
  • Then we have to go to WAN settings under the “WAN Settings” section from the left sidebar and follow the instructions mentioned below.
    • SSID: You have to enter the router network name here, enter as per your preference
    • Wireless Option: It is important that you select the enable option here
    • Channel: We also have to select the channel to Auto, from the drop-down menu
    • Passkey: This is the password for your router network access but not the admin panel access
    • Bandwidth: Select 802.11g from the drop-down menu and once done with the settings click on the apply button for them to be saved.
 Fujitsu Siemens Router Admin Password Change
Fujitsu Siemens Router Admin Password Change
  • Then click on the Administrator Password and then click on the “Enable” option and select it for the first option. After that, you will be asked to enter the username, which will be admin and here you can enter a new password and then enter confirm password. Then click on the apply button and now you have setup up a new password for your router.

In this way, you will be able to configure the Fujitsu Siemens router brand and make the necessary changes as required.

Default Username and Password for Fujitsu Siemens Router Admin Login Password Change

BrandModelProtocolUsernamePassword
FUJITSU SIEMENSROUTERSHTTP(none)connect

Filed Under: 192.168.0.1 Setting, Admin, Login, Password Change

192.168.0.1 CISCO Router Admin Login Password Change

December 15, 2020 by 192.168.01 Leave a Comment

Cisco Router: This is a very well-known brand that has spread its roots in all streams of communication. The Router from Cisco Brand is very precise with high efficiency in the transmission of signals. Cisco router does have the capability to transmit its signal with wider bandwidth and by providing secure networks.

Login to the Cisco web page to access the configuration settings can be made using the IP address. There is an IP address for every router that lets the user configure the settings as desired.

Here we will let you know how to configure the Wi-Fi Settings for Cisco Route with default login credentials. It might be harder to setup at the router wireless setting at first as you need to follow a sequel procedure. Only with proper login access, the new users will be able to access the Cisco Router web page and setup their respective routers.

To make the LAN connection secure once it has been converted to the Wi-Fi network, password protection is a must. Connect your movable devices to this Wi-Fi and start using the data connection using a secured network.

Cisco Router Admin Login
Cisco Router Admin Login

How to Setup Cisco Router:

I hope you know how to login and get the settings done, but we have got a secure way of setting the router. This hard connection of wire and the login process will let you setup the Cisco Router in easy steps.

  • Firstly, get your Cisco Route placed near Power Slot to insert the Adapter
  • Connect the LAN wire form Internet provider to Cisco Input slot
  • Now get a two side ethernet cable and attach from the router output slot
  • The other end of same Cisco to be inserted to ethernet slot of PC or computer
  • Now launch the web browser in your computer and enter the IP address 192.168.0.1
192.168.0.1 Admin Login
192.168.0.1 Admin Login
  • Make sure you have supplied the power to the router and then hit the IP search
  • Cisco Router web page will be launched and will ask for credentials
  • Enter the Login Username and Password, which are the default for first time
  • Use ‘unknown’ as username and password, then enter Login button

You have just passed the credentials to the Cisco Router web portal and it had made you successfully login. Once you are in the admin, you can go on to access the configuration and setup the router.

Cisco Router Wireless Setup:

Setting the router with a wireless network is an important task once you have successfully logged in. Below is the clear step wise process to setup the wireless connection.

Cisco Router Wireless Settings
Cisco Router Wireless Settings
  • Once your login to Cisco setup page using IP address
  • Click on Setup button and then select Quick Setup option
  • Firstly, change Password by confirming it twice being unique
  • Go to Wireless connection box, click on enable button
  • Then select the respective option and security Mode as WPA2
  • Use the Encryption key mode and then Password for Wi-Fi

That’s it! Cisco Wi-Fi connection for your LAN connection has been secured using WAP2 security and protected with a unique password separate then your Login Password. Make sure your Login password and Wi-Fi password differ to make the connection secure.

Filed Under: 192.168.0.1 Setting, Admin, Login, Password Change

192.168.0.1 Foundry Networks Router Admin Login Password Change

December 15, 2020 by 192.168.01 Leave a Comment

Foundry Networks Router Setup: Foundry Networks is well-versed Networking hardware brand across the world which excelled in producing Switches, Routers, and Application Delivery Controllers. Out of which their production of the router has been appreciated by all the users all across the world and why are they focused more on that line of products while extensively bringing other products online as well.

Their routers are good performing ones with exceptional speed performance and the ability to run with different bandwidths. They launched dual bandwidth routers that were something that increased their value and userbase in the market as well.

How to configure Foundry Networks Router – Foundry Networks Router Configuration

Foundry Networks Router Admin Login Password Change
Foundry Networks Router Admin Login Password Change

In this article, we will be going over one of the common models of the router in the Foundry Networks routers and show you have you can make the account settings, configuration.

192.168.0.1 Admin Login
192.168.0.1 Admin Login
  • The first step is to open the Foundry Networks IP address which is 192.168.0.1 into the address bar of your selected browser from either laptop or computer
  • Then we will be asked to enter the username and the password in the login popup that will appear on the tab.

Enter the username as “admin” and the password also as “admin” and simply click on the login button to load into the admin panel

  • Go to the SSID Profile and under this, you will have to select “PF-Open-ssid_prof” from the drop-down and then select the “Basic” options and follow the below settings
    • Under Network > Network Name (SSID) you have to enter your preferred name for the router network name
    • Under 802.11 Security, you have to select None under “Network Authentication” and under “Encryption” select Open and follow below password settings
Foundry Networks Router Network Settings
Foundry Networks Router Network Settings
  • Now you have to go under the Key section which is called the Password or the key phrase for the router. Then enter the password and then retype the same password and save it.
 Foundry Networks Router Wireless LAN Settings
Foundry Networks Router Wireless LAN Settings
  • Then you have to select the configuration, select “AP Group under it and select edit for “PoC_PacketFence” and under the profile, we have to select “Wireless LAN” and follow the below settings
    • Wireless LAN: Enabled
    • SSID: Router name to be setup
    • Passkey: Router network password to be setup here

How to setup Guest Wireless Connection on Foundry Networks Router

There are many times when you will have guests and people at home who would like to access the Internet. So, it would be wise to setup up the guest account as well.

First, go to the AAA Profile and under then select “PF Open” and under this section you will have to follow the below settings

Foundry Networks Router Initial Role Settings
Foundry Networks Router Initial Role Settings
  • Initial Role: Select from the drop-down menu “PF-Open-guest-logon”
  • MAC Authentication Default Role: From the drop-down select “guest’
  • 802.1X Authentication Default Role: From the drop-down select “guest”

Simply click on the Save button at the bottom and this will enable the guest wireless connection!

Once you have followed all the above steps one by one, you will now have a fully configured router for the Foundry Networks Router with the wireless connection, password enabled and also guest access enabled as well.

Default Username and Password for Foundry Networks Router Admin Login Password Change

BrandModelProtocolUsernamePassword
FOUNDRY NETWORKSIRONVIEW NETWORK MANAGER Rev. VERSION 01.6.00A(SERVICE PACK) 0620031754HTTPadminadmin

Filed Under: 192.168.0.1 Setting, Admin, Foundry Networks, Login, Password Change

Next Page »

IP 192.168.0.1 © We are not responsible for any mistakes in the content in this website for any enquires please read Privacy Policy| Disclaimer – User Agreement | Contact Us |