192.168.0.106

Interbase Router Setup: Interbase is a Database management company and many people would assume that they only run databases all across the world. But they also have a good lineup of routers that have been available over the period of time in certain eastern countries alone but they have been worth the price and value since users have been avidly using them with rave reviews all across the web.

In this article, we will be going over one of their basic models to show you how the configuration and routing process goes on, since they do have a different IP address and also an interface which is quite similar to many other router brands as well.

How to Configure Interbase Router –  Interbase Router Setup Process

There are quite a few models under this brand that I would assume you might have one of them and you can start with the instructions from the below.

• Step 1: The Internal IP address for this router brand is 192.168.0.106. Enter or type the IP 192.168.0.106 in your address bar of the browser and click either on enter or on go button

• Step 2: Now we have to enter the login information into the login popup that has appeared on the same tab here. For the Username, enter “SYSDBA” and then for the Password enter “masterkey” and then click on the login button to continue

These two steps will get you access to the Interbase router admin panel and now we will head towards the internal configuration for the router.

• Step 3: We have to click on the Wireless section and then go to the Basic, then make the changes as shown below.
  • Check the “Enable Wireless” option and this will enable the wireless connection
  • Then check the “Enable Wireless Multicast Forwarding (WMP)”
  • SSID: Here you can enter a name for your router’s network
  • Country: You have to select your country from here
  • Max Clients: Select the max number of clients or the users that you want to have connected at once.
  • Once the settings are done, click on the Apply\Save button and it will save the changes made.

• Step 4: Now under the same Wireless section, go to the “Advanced” and make sure the below said settings are done.
  • Band: 2.4GHz
  • Channel: Auto
  • 802.11n Rmax: Auto and other settings should be as they are, then click on Apply\Save to make the changes.

• Step 5: Now head towards the security settings from the Wireless section and make the changes as below instructions.
  • Enable WPS: Disabled
  • Select SSID: You have to select the “SSID” which we have setup in the above steps
  • Network Authentication: Here you will select:WPA2-PSK” option
  • WPA/WAPI Passphrase: Enter the password
  • Then the remaining options will be the same and then click on the Apply/Save button and the security changes will be made.

Now we have quite easily setup the Interbase router, and you can do the same by going over the instructions from above to configure the Interbase router.

Default Username and Password for Interbase Router Admin Login Password Change

Brand	Model	Protocol	Username	Password
INTERBASE	INTERBASE DATABASE SERVER Rev. ALL	MULTI	SYSDBA	masterkey