10.0.0.1

10.0.0.1 Aethra Router Admin login & Password Change

January 8, 2021 by 192.168.01 Leave a Comment

Aethra Router Setup: One of the brands that has been Solley focused on creating WAN routers for small house to large scale offices that define the networking in modern world. Aethra understands that with modern development, the routers have to be upgraded as well to match the quality of speed and bandwidth usage users are expecting.

They have created a variety of routers that have really amazing features while one of the unique and understandable being the routers can support up to 600 Mbps which is a huge mark.

When you look at your ally, the Broadband network service providers have equipped their servers with high speed Internet and more bandwidth usage is being allotted to everyone.

In order to make sure the users are capable of utilizing the ultrafast and growing speed, performance and bandwidth Aethra has created some of the robust routers of all times.

10.0.0.1 AETHRA Router Admin Login Password Change

In this article we will be first taking a look at simple hardware connection steps for the Aethra router and then acknowledge the internal installation steps with use of Default IP address, username and password.

How to Setup Aethra Router – Aethra Router Configuration Process

Hardware Connection:

As you can see in the below image, we will follow the same instructions which I have mentioned below:

Ethernet Connection: The Broadband service ethernet cable will be connected to the Aethra router, which will enable transmission of the Internet from the Broadband service provider modem to your router.
Power Supply for Router: Your Aethra router will come up with a power unit that needs to be properly plugged in.
Connection to Laptop or Computer: From your router, you will connect an ethernet cable from the router port to the laptop or computer’s ethernet input port.

Software Instructions – Wi-Fi Enable, Default IP Address, Username and Password

The first step is to go to the Default IP address from your browser which is 10.0.0.1:53920
After entering the default IP address into the browser address bar, you will have to log in with the username and password

Aethra routers have the same default username and password for all the routers mode, where username is “anything” and the password is “blank”
Enter the username and password into the login box, then click on ok button to continue which will now login to the router panel

Connect Aethra Device to Laptop/Computer

Once you have entered the login information, you will be shown “Aethra – Star Manager” where you will have to click on “Turn on the device” which will begin to connect the router to your laptop or computer

Next step you will be taken to “LAN” page where you need to enter the default IP address and subnet mask which will auto populate (It will appear itself). Then click on “Enable” option under the DHCP server and click on Next button

Last step will be “WAN” section, where you have to select an option under “Encapsulation” from the drop-down menu and you need to select “PPP over Ethernet (PPPoE)” and then click on next button.

Aethra WAN PPP Over Ethernet Setup PPPoE

Now you have completely configured your Aethra router!

Default Username and Password for AETHRA WiFi Router Admin Login & Password Change

Brand	Model	Protocol	Username	Password
AETHRA	STARBRIDGE EU	HTTP	admin	password

Aethra Router Default Username & Password

10.0.0.1 Origo Router Admin Login Password Change

December 15, 2020 by 192.168.01 Leave a Comment

Origo Router Setup: Origo is a part of SISK group which is well known for being one of the best consumer companies in the world and they also have a good lineup of routers that they have produced over the time. In this article, we will be discussing the features of routers from this company in brief and then explain to you the main steps required to configure this router which is the important part of this guide. All their routers are known for being designed nicely, next their features include dual gain bandwidth with double frequency along with speed performance which is really high and then their routers can also use the bandwidth effectively.

How to Configure Origo Router – Origo Router setup guide

Let’s assume that you have set up the router’s hardware which might take some time for starters but once you are done with it, then you need to learn the process to log into the admin panel through which we can make the settings and configuration directly.

First open your browser and then go to the address bar, then type the IP address 10.0.0.1 and click either on the go or else on the enter button from the keyboard
In the next step, you can see the browser will load login window in the same page and there you can see username and password as the required credentials

Now in the login window, for the username enter admin and then for the password you will have to enter admin1234 and then click on the login button

Origo Router Wireless Configuration Guide – Internal Settings

Now that we have the router in place and the access to the web configuration panel is on then you have to follow the steps mentioned below which will help you enable the wireless settings and configure the router.

Radio Setup: Click on the Wireless option from the top menu section and then click on Radio Setup from the left sidebar to make the below settings.

Wireless Radio: Select “On” option
Under Wireless, Mode: Select “802.11b, 802.11g, and 802.11n” option
Bandwidth: Select “20Mhz”
Channel: Select “Auto”
Power Level: Select “100%”

SSID Setup: From the left sidebar click on SSID Setup and then make the changes as shown below.

SSID (Network Name): Select the SSID from the drop down list
SSID State: Select “Enabled” option
Broadcast SSID: Select “Enabled” option
Rename SSID: You can enter a new name for the selected SSID as per your own preference and then click on the Apply button

Security: Once you have clicked on the Wireless option from the top menu section and then click on Security from the left sidebar to make the changes as per the below settings.

SSID (Network Name): Select the SSID which you have setup in SSID Setup step
Security Type: Select “WPA-WPA2-Personal” option
Encryption type: Select “AES’ option
Security Key / Passphrase: Select “Use Custom Security Key:” and then enter a custom password here which can be as per your own preference as well and then simply click on Apply button

Finally you have now configured the Origo router by following the above guide.

10.0.0.1 PentaSafe Router Admin Login Password Change

December 15, 2020 by 192.168.01 Leave a Comment

PentaSafe Router Setup: PentaSafe is a popular router company from the United States, which is quite well known for producing routers that are based out of high speed performance at the same time, the bandwidth effective usage is also one of their essential features. They do have dual gain bandwidth in their most recent products that has increased the sales for this company. One the other hand, the pricing for all their products is quite reasonable and has paved many fans to like their products which is one of the reasons why we are reviewing one of the products to show you the configuration and further steps.

How to configure PentaSafe Router Guide – PentaSafe settings process

Going over the router, first make sure that the hardware setup is done properly such that the configuration process can be handled quite easily. If it’s your first time, then you simply have to follow the below steps which will show you the login process first.

Open your laptop or the desktop computer which is connected to the router via the ethernet cable
Now open your browser and enter the IP address 10.0.0.1 into the address bar and then simply hit on the enter button or else on the go option from the browser directly
This will suddenly open up the login panel, then you have to enter the required login credentials as asked
Then the username and the password are to be entered as admin and pentasafe respectively in their respective boxes

Once you make sure that the proper details are entered then simply press on the login button and this should give you access to the admin panel

PentaSafe Router Wireless Configuration – Internal Settings Guide

Well now that you have the access to their internal platform for further web configuration panel, then the setup process begins. The setup process includes the wireless configuration that includes basic, advanced and wireless security.

Wireless Settings: The essential part of this guide is the wireless setup, in order to do this go and click on the Interface Setup option from the top menu section and then click on the Wireless option. Then on the below page you will have to make the changes shown as per the below instructions.

Access Point: Select “Activated” option
Channel: Select your country here
Beacon Interval: Enter “100”
RTS/CTS Threshold: Enter “2347”
Fragmentation Threshold: Enter “2346”
DTIM: Enter “1”
Wireless Mode: Select “802.11b+g+n” option
Station Number: Enter “0”
Under 11n Settings, Channel Bandwidth: Select “20 MHz” option
Extension Channel: Select “above the control channel”
Guard Interval: Select “AUTO”
MCS: Select “Auto”
Under SSID Settings, SSID index: Select “1”
SSID: Enter the name for your router network here and make sure it does not exceed 32 characters maximum limit size, while the name can be alphanumeric
Broadcast SSID: Select “Yes” option
WMM: Select “Disable” option
Use WPS: Select “No” option
Under WPS Settings, WPS mode: Select “PBC”
Click on “Start WPS” option and then enter your password and finally click on the save button

Once you make sure that the instructions are properly followed step by step, then it would be quite easy for you to configure the whole router.