Find Router IP Archives

Fix 192.168.0.1 Router Troubleshooting and How to Resolve an IP Address Conflict? and How to Release and Renew IP Address: The Internet Protocol Address is also known as IP address, IP is a protocol by which amount of data transferred from one computer to another computer through the internet, IP address is a logical address b that is assigned to every single computer, printer, switch, router.

IP address of every computer will different from another computer on the internet, so IP address provides some unique and different identities to different computers and because of this IP address is one of the most integral parts of a computer so that you can work on the internet.

There are number of IP addresses related problems facing by many people every day, sometimes computer warns an error message that “You Are Unable to Connect to Internet Network”, this error message is due to same IP address of devices on the same network causes network conflict and leads to stop one device to connect to the internet network, for private IP addresses a rage will define from 192.168.0.0 – 192.168.255.255, as you know that Your work will be stopped if you unable to connect to internet.

Here are some most common error messages related to IP address related problems:

There is an IP address conflict with another system on the network!
This IP address is already in use on the network. Please reconfigure a different IP address!

About 192.168.0.1 IP Address:

The 192.168.0.1 is a private IP address used by various router brands and broadband such as D-Link routers and Netgear broadband routers, this IP address is used by different computers across different networks or broadband but only one computer is connected to one IP address in a particular network.

If two different devices of the same network using the same IP address of 192.168.0.1 then it leads to IP conflict and also one of the computers on the same network will be unable to connect to the internet, if two different devices of the different network using the same IP address then there is no problem with it, so this IP address can be used in two different networks or broadband and no problems regarding this IP address, However, if there are some problems with this IP address, follow below procedure “how to fix this IP address”.

How to Resolve an IP Address Conflict?

There are few ways to Resolve IP address Conflict and to fix this problem, to fix this problem you have to release and renew the IP address using Command Prompt, so follow below procedure to resolve IP address conflict.

Renew IP Address & Release IP Address:

First of all, to fix this problem you have to release and renew the IP address using Command Prompt, so click on start button and make a search for CMD or press WIN + R on your computer keyboard and type CMD then click enter.
After opening the Command Prompt CMD tab then type “ipconfig /release” command to release your IP address.

How to Fix 192.168.0.1 Router Troubleshooting Problems

On the basis of the number of adapters installed in your computer, you have to make several results from above command.
If you are using a “static IP” address then the operation results an error message as “The operation failed as no adapter is in the state permissible for this operation”.
After the above operation, you have to run another command of renewing to renew your IP address which will try to get DCHP server.
So type “ipconfig /renew” on CMD, to renew your IP address.

After a few seconds, you will see results and there should be an IP address listed to IPv4 addresses.

How to Configure a Router to 190.168.0.1?

Your network‘s configuration administration interface can be accessed by visiting and you can solve common issues and problems related to IP address, here we gave the list to change router or modem settings with wired and wifi networks.

The device has failed to connect via the internet browser.
The device is set up to use another address than 168.0.1 like 192.168.0.1.
The computer fails to connect to the network.

Unable to connect to 192.168.0.1:

If you are not able to connect to your internet network of IP 192.168.0.1 then follow the below procedure to solve your problem.

Firstly go to the start menu on your desktop and make a right-click on the network icon.
Then select network properties and select “View Status of Your LAN Connection” under network properties.
After selecting the “view status of your LAN connection” option then Then you will select properties, then click on Internet Protocol TCP or IPv4.
After clicking on TCP or IPv4 then from there you can automatically choose to get the IP address, or you can give a new IP address.
Then you can leave the subnet mask at 255.255.255.0 and for connecting to the default gateway type in 192.168.1.1.

That’s it follow the above list of steps to solve your problem of unable to connect internet.

How to Troubleshoot IP 192.168.0.1?

The 192.168.0.1 is an IP address sometimes causes a problem in opening of management console or sometimes unable to access login page through IP address, and another problem is that after entering Username and Password we are unable to access inner pages of management console, that means you cannot connect to your wireless router and how to resolve this type of issue? A procedure is given below.

First of all, go to start menu and search for Run or press “WIN+R” on your computer keyboard.
On the run tab type operation “ipconfig” and press enter button on your keyboard.
Then you will see your computer IP address on Command Prompt as Default Gate Way.
Then go to the address list as the default Gateway using your browser to open your router’s web interface.
After the above step press reset button and keep button about 30 to 40 seconds until it restarts
Once unplug your router to shut down and again plug it to open it again.
After restarting your device above steps make your router to reset the Ip address and other settings to their default position.

Conclusion:
From above article IP address is one of the important parts in a computer, and it may help to connect your computer to the internet but sometimes problem comes due to network conflict, this is due to connection of different computers to same IP address in the same network, if there is any problem with this 192.168.0.1 IP address follow the above procedures to solve your problems easily.

IP address of a router is a default gate way in your network connection, you can access your router through web based setup and this access you to change settings through web such as User name and password including name of Wi-Fi network, this web based setup of your router enables to change settings as well as viewing information such as your router ID to access it, so IP address of your router is important because using router IP address you can access router web based setup page, where you can modify router settings.

Generally every router have two different IP addresses named as Local Area Network LAN and Wide Area Network WAN, we use Local Area Network as internal network and we use Wide Area Network WAN as connection and used for connection of optimum online, LAN is more secure and faster than wide area connection WAN, WANs typically require two or more of LANs to be connected over the public Internet or via a private connection established by a third-party telecommunications provider.

Find Router’s IP Address in Windows:
As you know that your router IP address is “Default Gateway” in your network connection, you can find router IP address in windows in two different methods one is using CMD and another one is sing system settings(Control panel >Network and internet > Ethernet),

Find Router’s IP Address with CMD in Windows:

You can easily and quickly find Default gateway address of router using Command Prompt by using command “ipconfig”in Command Prompt CMD.

Find Router’s IP Address with Control Panel in Windows:
Firstly make click on Start button and make a search for “control panel,” and then hit Enter or press WIN + R in keyboard and type “Control Panel” and press enter to open Control panel.
Then click on “View network status and tasks” below or under “Network and Internet”
Then click on Ethernet option in the upper right corner of the “Network and Sharing Center” window and in the “Ethernet Status” window click the “Details” button as shown in below picture.

After clicking of “Details” on “Ethernet Status” window you will see window containing your Default gateway address.

That’s it just follow above procedure to find routerIP address in windows, find router’s IP address using CMD in windows,find router’s IP address using control panel in windows.

Find Router IP Address in Mac OS X:

If you are using MAC OS X, you can find router IP address in straight forward, to do this click on Apple menu and then select ‘System Preferences’ and select “Network Icon” under system preferences, then click on advanced options under Network icon.

First of all make a click on “Apple Menu” present at top of your screen.
Then select “System Preferences” and the select “Network Icon” under “System Preferences” as shown in below picture.

Then select name of your Wi-Fi router under “Network Icon” then click the “Advanced” button at the bottom of the screen.
After Clicking “Advanced” select the “TCP/IP” tab. You’ll see your router’s IP address namedas “Router”.

That’s it just follow below procedure to find router IP address in MAC OS X.

Find Your Router’s IP Address on the iPhone and iPad:

To Find router IP address on iPhone & iPad 1st go through given path Settings > Wi-Fi> name of your Wi-Fi network, then You’ll see the router’s IP address listed as “Router”.That’s it just follow below procedure to find router IP address in MAC OS X.

Find Your Router’s IP Address in Android:

Android doesn’t provide a way to view IP address of your router, but many third party android apps will provide information about direct gateway of your router, so we use some apps to find routers IP address in android such as WI-FI analyzer and etc.,

If you have WI-FI analyzer application on your smart phone, just follow given below procedure to check wireless router IP address.

First of all open “WI-FI Analyzer” application and tap on view “Menu” option.
Then tap on “AP List” under menu option, then select name of your network connected to your computer.
Then window will appear with more information about your network. You’ll find the router’s address listed as “Gateway”.

That’s it just follow above procedure to get wireless router IP address in android phone.

Find Router’s IP Address in Linux:

Most Linux desktops have a network icon in their notification area, so you can click this network icon and then select “Connection Information”, then IP address displayed next to “Default Route” or “Gateway” as shown in below picture.

That’s it just follow above procedure to get wireless router IP address in Linux or Ubuntu.

Conclusion:
So these are the steps to find wireless router IP address and if you want to find your router IP address just follow above processes to find easily, following the steps and method you would able to find the routers IP addresses on Windows PC, IPad, iPhone as well as using the Mac OS X device.

How to Fix 192.168.0.1 Router Troubleshooting Problems?