• Skip to main content

192.168.0.1

Uncategorized

192.168.0.109 ACCONET Router Admin Login & Password Change

January 8, 2021 by 192.168.01 Leave a Comment

Acconet Router Password Login and Password Change Settings: Acconet which is very presumably called Acco Net is an online access platform that started producing routers after stepping up into the Computer networks industry sometime back. It has become a popular brand that functions all across the globe and services every part and product of modern wireless communication and Internet networking.

If you need a home router or office router then you can rely on this service because they produce some of the fast and high performing routers. This is a south Africa based brand that has the point of sales spread over the world and via the web which makes the distribution faster.

192.168.0.109 Acconet Router Setup Process – How to setup Acco Net Router Properly

If you have recently bought an Acconet router then you need to follow the below instructions properly which has the same basic steps involved to install the router and set it up.

ACCONET Router Admin Login & Password Change
ACCONET Router Admin Login & Password Change

Hardware Setup: The hardware setup is simply assembling the router in place before we begin the Internal configuration.

  • Setup the router in such a way that the Main ethernet cable from Broadband modem is connected to the router
  • Next, we need to provide power supply to the Acconet router via the cable management
  • Finally, use an Ethernet wire to connect router to the laptop or the computer you are using

Account Router Settings – Default IP Address, Username and Password – 192.168.0.109

Now let us continue with the internal configuration of the router since we are done with the assembly process.

  • Step 1: First we will have to open any of the browsers and then enter the default IP Address
    • In the case of Account Routers, all the routers have the default IP address set to 192.168.0.109
    • So, enter the IP Address i.e., 192.168.0.109 in the Address bar and click enter to continue
192.168.0.109 ACCONET Router Admin Login
  • Step 2: Now a popup will appear asking you to enter your Username and Password
    • Similarly, all the Acconet Routers, have the same default username and password as
      • Username – Admin
      • Password – admin (Please note that the password is in all small letters)
  • Step 3: After entering the details you will be now on the Acconet router settings page and then click on the Wireless 2.4 Ghz option on the left sidebar. Then you have to enter and change the page as per the below mentioned settings to make Wi-Fi enable on the router.
    • Wireless: Click on Enable
    • Wireless Network Name: You can enter any name for your router which will appear while searching for Wi-Fi via devices
    • Mode: Select 11bgn mixed
    • Channel: Auto
    • Channel Width: 40MHz
    • Check Enable SSD Broadcast option
Acconet Router Wifi Password Change through Network settings
Acconet Router Wifi Password Change through Network settings

Default User Name (Admin) and Default Password for Acconet Wifi Router

BrandModelProtocolUsernamePassword
ACCONETROUTER(none)Adminadmin
Acconet Router Default Admin Login Password Change

Finally, click on the Save button which will now enable the Wi-Fi on the router and make sure to change the password for it via accessing the encryption on the WPS option. At the same time, you have to select WPA-2 encryption under the WPS settings with a password longer than 8 characters to be accepted as valid.

Filed Under: 192.168.0.109, Acconet, Admin, Login, Password Change, Uncategorized

192.168.1.1 3Com Router Admin Login & Password Change

December 15, 2020 by 192.168.01 Leave a Comment

3Com Router Setup Settings: We all HP, Hewlett Packard as one of the leading electronics and Ether technology brands which were the successor of the 3Com network which was one of the leading brands for all Ethernet related services. It had made sure that the computers were compatible with the networking technology and has had a great name until its run end in the year 2010.

Being a brand of such versatile image, 3Com was the pioneer in Computer networking and technologies which led it to produce great products in Networking interface services, Switches, Routers and different other technologies which made lives easier for companies and people across the world.

Do you have a router from 3Com and want to make it work? Then you can read the below article where we will explain to you how to setup up 3Com router settings and make it Wi-Fi enabled.

3COM Router

How to Setup 2Com Router Properly – Login to 3Com Router and enable setting

The first and foremost basic step will be for you to connect the 3Com Router to the power source and then connect the external ethernet main source to the Router. Then, link the 3Com router to the computer or laptop through which you want to make the settings.

  • Step 1: First you will have to open your browser and type in the following IP address 192.168.1.1
3COM Router Admin Login Page for entering Password
3COM Router Admin Login Page for entering Password
  • Step 2: This will login to the 3Com router network interface which will ask you to enter your username and password
    • 3Com Router Default Details for 192.168.1.1
      • Username: blank
      • Password: admin
  • Step 3: Once you enter the details you will now be on the Router settings homepage for 3Com network interface
3COM Router Wireless Settings
3COM Router Wireless Settings
  • Step 4: We have to now click on “WDS” Tab which means Wireless Networking settings tab
    • And select WDS Mode as WDS-STA
    • SSID should be 3COM
  • Step 5: Then click on the Save button which will now enable the Wi-Fi settings on the 3Com router directly.
3COM Router Network Settings
3COM Router Network Settings
  • Step 6: On the right sidebar, click on “Wireless Settings” where you have to check the box “Enable Wireless Networking” option and then select the below Wireless settings
    • Channel – 11
    • SSID – Support WiFi
    • SSID Broadcast – Enable
    • Wireless Mode – Mixed (11b+11g) and then click on the Save button which will now make sure the Wi-Fi settings are properly enabled.

After the above step, we have now made sure the 3Com router has Wi-Fi enabled but it will have an open Wi-Fi which means anyone can access it and we now have to change the router settings to select a password.

3COM Router Wifi Password Change
3COM Router WiFi Password Change
  • Step 7: On the top tabs, click on the Encryption tab and under this tab we have to edit the WPA which is WiFi Protected Access settings to enable the password encryption on the router. You have to follow the below said instructions to change the password.
    • WPA – WPA-PSK(no server)
    • WPA mode – WPA2
    • Encryption technique – AES
    • Pre-shared Key (PSK) – You can enter the Wi-Fi password which you want to set and make sure this password key should be more than 8 characters long

Once done, click on the Save button at the bottom and you will now have changed the 3Com router password

Filed Under: Uncategorized

192.168.1.1 Mintel Router Admin Login Password Change

December 15, 2020 by 192.168.01 Leave a Comment

Mintel Router Setup: Routers have become a huge market in the world and in order to get a piece of the market, Mintel  a router company started creating routers that were not sold all across the world at first but become popular enough to have been spread all across the world which is literally a good thing. One of the exceptional reasons why this router’s models have been liked so many is because they produce high quality model which do not break easily and more importantly their features are good enough that the speed performance and the usage of the effective bandwidth is something that is off the mark as well and always match what is processed from the bandwidth given from the ethernet cable.

Mintel Router Admin Login Password Change
Mintel Router Admin Login Password Change

Mintel Router Configuration Guide – Mintel Router setup process

One thing you need to make sure of is that, the router hardware connection is done properly such that no connection is loose and then follow the instructions below which will guide you to access the admin panel for the router.

Router Login Process: So in order to show you the login process we will be using Mintel PBX model and here are the steps to be followed.

  • Open a browser and then enter the IP address 192.168.1.1 in the address bar
  • After that either click on the go or else the enter button from the keyboard directly
  • Next you will see that on the same window, login popup will appear and you need to fill the details
Mintel Router Login Page
Mintel Router Login Page
  • Username and the Password will be admin and SYSTEM respectively, and enter these details then click on login button which will now give you the access to the Mintel router’s admin panel

Mintel Router Wireless Configuration – Internal Settings

Now that you have the access to the Mintel router, let us show you the steps required to be followed in order to configure the router from the start.

Wireless SSID Setup: Click on the Wireless option from the top menu section and under this, you have to click on SSID Setup from the left sidebar and then make the changes as per the below instructions.

  • SSID (Network Name): This will be your router’s network name and you can name this as per your own preference.
  • SSID State: You have to select the “Enabled” option here
  • Broadcast SSID: You have to select the “Enabled” option here
  • Rename SSID: This will only be used if you want to rename your present SSID and you can name this as per your own preference but only use it if you want to rename the present SSID.
Mintel Router Wireless Settings
Mintel Router Wireless Settings

Wireless Security Setup: Click on the Wireless option from the top menu section and under this, you have to click on Security Setup option from the left sidebar and then you need to make the settings changes as per the changes shown below.

  • SSID (Network Name): Select the SSID which you have made in the above step
  • Security Type: Select “WPA – WPA2 Personal” option from the drop-down menu options
  • Encryption Type: Select “AES” option from the drop-down menu options
  • Security Key/ Passphrase: Select “Use Custom Security Key” option and enter your password here.

Once you have followed all the steps mentioned above you have now completely configured the Mintel router from scratch and this way you can configure the router anytime in the future as well.

Filed Under: 192.168.1.1, Admin, Login, Mintel, Password Change, Uncategorized

IP 192.168.0.1 © We are not responsible for any mistakes in the content in this website for any enquires please read Privacy Policy| Disclaimer – User Agreement | Contact Us |