10.0.0.2

10.0.0.2 Conexant Router Admin Login Password Change

December 15, 2020 by 192.168.01 Leave a Comment

Conexant Router Setup: the IP address of the Conexant modem is unique 10.0.0.2 from all other router models, thus the configuration settings to be made can be accessed through this IP address. There is also default username and password for all Conexant router model’s. once your login to the modem successfully using default login credentials, you can view the device information by selecting ADSL status.

Here you can also view signal information segregated in terms of download and upload. This precise home page of Conexant will help the user to check the status of the internet data and the devices connected.

Users can also have a look at the amount of data used by a particular device and can monitor all their activity. This will help you to control your usage of internet data and won’t let you cross the monthly bought bandwidth. Configure the settings as required and make the Wi-Fi network secure without letting any unknown user access it.

Conexant Networks Router Admin Login Password Change

How to Setup Wi-Fi for Conexant Router:

This is an important setting that needs to take first to configure the wireless connection once setting the Router. Here is a stepwise process that lets your setup Wi-Fi for your till now used LAN connection.

Login to Conexant Admin Page using the IP address 10.0.0.2
Then pass the username and password which are default login credentials
The credentials need to change once your login for the first time

As admin page is loaded now, click on WAN button from Configuration options
Here you need to enable the Wireless option and Name your Wi-Fi to display
Select options displayed below and use the encryption key to make Wi-Fi secure
Security of Wi-Fi will be enabled once a Password encryption key is entered
Click on Save button at bottom of the page to enter configuration settings

That’s it! As now you have successfully configured the Conexant Wireless settings, start to search your ConexantWireless network name form Mobile device Wi-Fi and tap to connect. You need to pass a password to connect this Wi-Fi as you have opted for the encryption key.

DNS configuration on Conexant Router:

Know how to Configure DNS setting for your router which lets you access its configuration in quick steps. Make sure you follow the settings properly, else accessing your Conexant Home page will through an error.

Go to Browser and search for IP 10.0.02 to display the home page of Conexant
You need to pass default Login username and password to access the Admin page
Once the credentials are verified, you will be taken to Conexant admin page
Here click on DNS option in the list of the menu at left-hand side
Select DNS proxy selection as Auto mode and then click TAB button
Now enter preferred DNS server and Alternative DNS server name as desired
Click on Submit button and that’s it your DNS entry are saved

This is how you configure the DNS IP address and let them access your router IP page using this configure the IP address. It is also preferred that the Wi-Fi password and Conexant Admin Page password be different, to make the connection secure from unknown users.

10.0.0.2 JAHT Router Admin Login Password Change

December 15, 2020 by 192.168.01 Leave a Comment

JAHT Router Setup: JAHT is a prime router brand in the region of the United States and widely popular in the similar neighboring European countries for its efficient bandwidth usage and speed performance products. Their key features have been the wireless side run broadband connection with at least 54Mbps with an 802.11g standard, while also having the compatible version of the 802.11b hardware. They come with other features such as dual gain bandwidth and a whole set of the different wireless mixture making it way much easier to use the ethernet facility.

They have one of the most popular products with the name WAM-4054P which uses ADL and VPI technology. All the other products are based on the same router model as well, that is why we will be showing you how to configure this.

How to Configure JAHT Router – JAHT Router Setup Guide

JAHT is not a new brand and that is one of the reasons why they use an old interface in order to configure their routers.

Step 1: First you will open your browser from either laptop or computer, then go to the address bar and then type the IP address 10.0.0.2 and then click on the go or enter button

Step 2: After that you will see that a login popup on the same window will appear which will ask you now to enter the username and the password. Enter the username as admin and the password as epcirouter, then click on the login button to continue loading the web configuration panel.
Step 3: Now you have the access to the admin panel through which you will be able to make the wireless configuration that needs to be setup. Go to the WAN option from the left side and then make the changes as shown in the below instructions.
- Bridge: Select “Disabled” option here
- Virtual Circuit: Select “Enabled”option here
- IGMP: Select “Disabled” option here
- Encryption: Select “PPPoA VC+Max” option here
- Under the ATM settings, do not make any changes and leave it as it is
- DHCP Client: Select the “Disabled” option from here and the Host Name as “UK” or country preference
- MAC Spoofing: Select the “Disabled” option here and then do not make any changes under the “Static IP Settings” as well
- Other options should be left as they are and then click on the submit button.

Step 4: Now go to the “Wireless” option from the left sidebar and then here make the necessary changes as shown below.
- SSID: Here, enter your router name
- Channel: Enter “1” here
- Security: Select “Disable Encryption” option here
- Key Length: Select “18 bit” option here
- Auth Type: Select “Open System”
- Passphrase: Enter your password here
- Key 0: Select this option
- Secret AP: Select “Disable” option here and then click on the Submit button to make the changes happen.

JHAT Wireless Settings — JAHT Wireless Settings

Step 5: Now go to the “WLAN Security” and make the changes as per below settings
- WPA Mode: Select ‘Disable” option here
- Network Authentication: Select “WPA Pre-Shared Key” option here
- Data Encryption: Select “TKIP”
- WPA Pre-Shared Key: Enter your router password here
- WPA Group Rekey Interval: Enter “0” here

JHAT Wi-Fi Protected Access (WPA) — JAHT Wi-Fi Protected Access (WPA)

Do not make any changes to the other options and leave as they are, then click on the submit button finally.

10.0.0.2 Mediatrix 2102 Router Admin Login Password Change

December 15, 2020 by 192.168.01 Leave a Comment

Mediatrix 2102 Router Setup:Mediatrix is another American router brand which has paced its way through effective router model production over the period of time. In this article we are going to discuss more about the 2102 router model from this brand which has received very good reviews and feedback from the users and router industry in terms of build, performance and the effective use of the bandwidth has been great. Mediatrix router have always been for being the most reliable because they are made out of constructive feedback from the public opinion and in this modern world of hustle, they still manage to keep the design clean, effective and sleek to use in any place as well.

Mediatrix 2102 Router Admin Login Password Change

How to setup Mediatrix 2102 Router – Mediatrix 2102 Router Configuration Guide

So, you have to make sure that the router hardware configuration is done properly such that the further wireless configuration is not interrupted in the process. Once you have checked all the hardware connection then follow the instructions mentioned below.

First open your browser and then enter the router internal IP address which is 10.0.0.2 into the address bar of the selected browser from your laptop or computer
Then click on the enter button and now you will see that the login popup will appear and here you have to enter the Username and the password. The username is supervisor and the password isEUTELIAVOIP, then click on the ok button.

Mediatrix 2102 Login Page — Mediatrix 2102 Router Login Page

Once you have clicked on the Ok button, this page will now load you the homepage of the admin panel for further process.

How to enable Wireless Setting on Mediatrix 2102 Router – Internal Settings

Once you are on the homepage of the router’s admin panel, we can start the further configuration process to make the wireless connection settings.

Network Settings: Go to the Management option from the top menu section and under this you will find Network Settings option and you have to click on it, which will load a new page on which you have to make the changes to the settings as per the below instructions.

Under Ethernet, Network Port Speed: Select “autoDetect” option from the drop-down menu options
IP Address Source: Select “Static” option here
IP Address: Enter the IP Address 10.0.0.4 in this box
Subnet Mask: Do not make any change here as this will auto-populate itself
Default Router: This is your default router IP address which is 10.0.0.1
Primary DNS: This will be the primary DNS and it is 10.0.0.1
Secondary DNS: This will server as the secondary DNS which is 62.94.0.1
SNMP Port: Enter “161” here

Mediatrix 2102 Network Settings — Mediatrix 2102 Router Network Settings

STUN Settings: Go to the Advanced settings option from the top menu section and then under this click on the STUN option, on this page you will have to make the changes as per the instructions below.

STUN Activation: Click on the “Enable” option here
STUN Server Host: You can enter any name here
STUN Server Port: Enter “3478” number here
Query Timeout: Enter “2000” number here
Query Cache duration: Enter “0” number here
Keepalive Interval: Enter “30” number here
Custom NAT Traversal Activation: Click on “Disable” option here and finally click on the submit button to make the changes.

Mediatrix 2102 Advanced Settings — Mediatrix 2102 Router Advanced Settings

In this way you will be easily be able to configure the Mediatrix router in less than 5 minutes and make sure to go over the hardware settings once again so that no problems occur while following the instructions above.