192.169.0.109

192.168.0.109 EverFocus Router Admin Login Password Change

January 29, 2020 by 192.168.01 Leave a Comment

EverFocus Router Setup: EverFocus is a multinational company that has widespread wings in different sectors of Technology such as Networking, security, and computers as well. Routers have been a huge performer for them over their period of release and users have liked them as well. Now they are more concentrated towards the AHD Camera, Analog and IP camera production and manufacturing section of the industry.

But still, there is a lot of router from this brand that are in access across the web that you might be using and want to try as well. So you can use this guide to learn the basic requirements to configure a router from the EverFocus brand.

EverFocus Router Admin Login Password Change

How to Configure EverFocus Router Settings – Internal Setup Guide for EverFocus on 192.168.0.109

EverFocus is a large brand but at the same time an old one which is why you can see from the below guide that their web interface for the admin panel is not modern. But even though it is old, it works like charm and you can follow the instructions from the below steps to configure your router in no time.

So, the EverFocus router Internal IP address is 192.168.0.109 which you have to type into the address bar of the router from your laptop or computer as per your preference
Then once you have hit the enter button, the connection between the Internet and router Internal IP will be established, then a login page will appear

In the new login page, you have to enter the username which is going to be “admin” and the password will also be “admin”, confirm the details once since the password is case sensitive

Then click on the login button at the bottom which will now begin the admin panel access and you will be able to have the web configuration interface before you once the login is properly done.

On the EverFocus router admin panel, go to “LAN” from the left sidebar and then under the Network Type select “DHCP” from the dropdown and click on Apply button

After that go the “DDNS” option from the left sidebar below LAN and Email under which you need to make the below settings
- DDNS Service: Everfocus DDNS, select this option from the series of drop-down menu
- DVR Name: This name will be the name for your router which you can have it as your preference

From the top menu section, you will have to go the “WAN” button which is fourth from the left and under this section we have to make a few changes as below
- Wireless Network: Enable
- Wireless Network (SSID): This will be your router name
- Network Passkey: Under this, you need to enter the passkey for the above-named router network to access via Wi-Fi and wireless connections
- Channel: Select “Auto” from the drop-down menu
- Bandwidth: You need to select 24GHz from the given drop-down menu

In this way, you will be able to make the wireless connection enabled on the EverFocus router and now you can enjoy seamless Internet connection via wireless devices.

Model Wide Everfocus Networks Router Username and Password for Admin login Password Change

Brand	Model	Protocol	Username	Password
EVERFOCUS	POWERPLEX Rev. EDR1600	MULTI	admin	admin
EVERFOCUS	POWERPLEX Rev. EDR1600	MULTI	supervisor	supervisor
EVERFOCUS	POWERPLEX Rev. EDR1600	MULTI	operator	operator

192.168.0.109 Elsa Router Admin Login Password Change

January 19, 2020 by 192.168.01 Leave a Comment

Elsa Router Setup: Elsa is a familiar company when we talk about Computer solutions and has been well known for producing Networking and Computer devices for a long time now. Their advent into the router industry has been an amazing ride with the release of some of the best working modems and router which match the Industry standards all the time.

Also known for their high performing speed and bandwidth usage which made users believe in the brand and they are being used in households, offices, and industries as well.

192.168.0.109 ESLA Networks Router Admin Login Password Change — **192.168.0.109** ESLA Networks Router Admin Login Password Change

How to Setup Elsa Router Configuration – IP Address 192.168.0.109

Once the hard settings required are made correctly you can follow the below instructions which will help you to completely setup the Elsa router from the very scratch.

Select any browser from your laptop or computer and then go to the Address bar, where you will have to enter the IP address for the Elsa router
Enter IP Address 192.168.0.109 into the Address bar and then click on the continue button
Now you will be asked to enter the login details for the Elsa router which are the default username and password.
Enter Username as Admin and Password as none, then click on the login button which will take a minute and then redirect you to the admin panel of the router directly!

In this way, you will be able to access the Admin panel of the Elsa router and from here you need to configure the internal settings such as Wireless network and password as shown below.

Internal Configuration for Elsa Router Online

So now you are on to the admin panel for the Elsa router and you need to follow the below settings to make the setup.

The first page you will see now will be Switch Setup, here you have to select “Router Mode (NAT)” and then click on the Apply button. This will enable your router to work in the router mode first.

ELSA Networks Router Internal Configuration

Now click on the WLAN from the top and then select Wi-Fi filter option and under this, you have to click and check “Enable MAC Address Filter” option and click on the Save button.

The most important part is to go to WLAN and then select Wi-Fi setup where we have to follow the mentioned settings in order to enable the Wireless connection and Wi-Fi perfectly.
- Wi-Fi Enabled/Disabled: Check Enable option here which will enable the Wi-Fi settings
- Wireless Mode: Select 911.11n/g Mixed from the drop down
- Channel: Select Auto channel from the drop-down options
- Network Name (SSID): You can enter any preferred name for your Router network, this will appear on the search when you are trying to connect to your Wi-Fi network.
- Authentication Mode: Simply select WPA-PSK from the drop-down options
- Encryption Mode: Select TCP
- Network Key: Enter a password for your Wireless network connection i.e., Wi-Fi access password.

ELSA Networks Router WiFi Login Password Change

Finally, once you have made the said changes, simply click on the save button and the settings will reflect the changes in a bit.

Default Username and Password for ELSA Networks Router Admin Login Password Change

Brand	Model	Protocol	Username	Password
ELSA	LANCOM OFFICE ISDN ROUTER Rev. 800/1000/1100	TELNET	n/a	cisco

192.169.0.109 Alaxala Router Admin login, Password Change

January 6, 2020 by 192.168.01 Leave a Comment

Alaxala Router Admin Login Password Change Complete Setup: Every router brand is accustomed to being high performing and they should be robust enough, the same way Alaxala brand has made sure that every Modem, router and switch they made is the most efficient when it comes to Speed performance and can utilize the provided broadband bandwidth to the finest quality possible. If you want to operate a LAN network or a WAN network, you should be opting for this brand because they can provide highspeed ratio.

At the same cost while making sure your devices perform longer and can captivate more functionality. Alaxala brand is well known for high performance and you might own one of these routers, which is why we are instructing the guide to configure the router completely.

192.169.0.109 Alexala Wifi Router Admin Login Password Change

How to setup Alaxala Router – Complete Router Configuration for Alaxala

Hardware Connection and Resetting:
Assuming that you have a newly bought Alaxala router, then you will have to complete the hardware configuration first which will help us to complete internal configuration for the router later on in the guide.

Ethernet Modem Connection: First we have to connect the main Ethernet broadband connection wire to the Router, which will enable the flow of the Internet via the connection.
Power Supply and Computer Connection: In order for the Router to power on, you will use the adaptor and connect it to the Power cable and supply the source to the router to power it on. And then, we will have to connect the Computer connection, where an ethernet cable should be connected from the router port A to the computer or laptop ethernet port input.

Software Configuration – Setup Alaxala Router Internal Settings

Now once we are done with the hardware configuration, then we will have to complete the internal setup which will proceed with Default IP details and the login information.

Alaxala Default IP Address – 192.169.0.109

The default IP address for Alaxala router is 192.169.0.109 which is the same for all the router models in this brand. The IP can only work if the hardware setup is completely done and this will be used as an online portal for login through the default login information.

Alaxala Default Username and Password

The login information is mentioned below, which is the same for any other model in this brand and those are Username as “operator” and the password as “none”. These login details will be entered after connecting via the given Default IP address.

Alaxala Router Final Installation Setup

Firstly, we will have to open any of the browsers and then login with the IP address which is 192.168.0.109
And after entering the Default IP address, you need to enter the Username and password in the login information
This will make the router log into the control panel, where we can proceed with the internal settings for Wi-Fi and more
Now, go to the Wireless section where we need to enter the password and then click on the enable button which will enable the Wi-Fi settings for your router

Finally, click on the Save button which will completely configure the Alaxala router and now you will be able to connect your phones and devices via Wi-Fi through it.

Model wise Default Usernames and Password for Alexala Networks Router

Brand	Model	Protocol	Username	Password
ALAXALA	AX7800R	(none)	operator	(none)