• Skip to main content

192.168.0.1

Login

192.168.1.1 Intershop Router Admin Login Password Change

January 8, 2021 by 192.168.01 Leave a Comment

Intershop Router Setup: They are more of a worldwide commerce suite that helps people all across the world to do retail or commerce business. In this aspect, the use of routers is very much valued as an initial product. They used to create routers beforehand but now they have turned thoroughly into commerce as a business and software brand which helps other real businesses to grow with the extent of technology.

But do not think that their routers are still not famous, because these are used by people all across Germany and eastern Europe now as well. In this article, I would be showing you the main aspects that someone who has a new or told Intershop router should be looking directly into.

192.168.1.1 Intershop Admin Login Password Change
192.168.1.1 Intershop Admin Login Password Change

How to Configure Intershop Router – Intershop Router Setup Process – 192.168.1.1

IP Address Login: This is the first step, here you have to enter the IP address 192.168.1.1 in the address bar of the router.

  • After that, a popup for login will appear asking you to enter the username and the password which will be the generic login information.
192.168.1.1 Intershop Router Admin Login
  • For this, enter the username as “operator” and the password as”$chwarzepumpe” then simply click on the login button to continue.

Internal Configuration and Setup for Intershop Router

  • Now you will have access to the admin panel directly and simply go over the “WAN” option from the top menu and under this select the “Basic” option and make the changes as below.
    • Radio Enable: Select the “Enable” button here
    • Network Mode: Select “802.11b/g/n mixed” option from the drop-down menu
    • SSID 1: Select “CUSTOMIZED’ then in the second box enter your router network name
    • SSID 2: Follow the same pattern as above and only use this if you want to have two router networks
    • Country Code: Selec the country from the options
    • Channel: Auto
    • Channel Width: 20 and then click on Apply button on the top
Intershop Router Basic Settings
Intershop Router Basic Settings
  • Advanced Configuration: Then select the “Advanced” option from the same page and follow the settings below.
    • BG Protection Mode: Select “Auto” option her
    • Beacon Period: Select 100 here and DRM Period should be “1”
    • Other options should not be changed and will be automatically populated.
    • Then click on the apply button and the settings will be saved.
Intershop Router Advanced settings
Intershop Router Advanced settings
  • Go to WPS and then click on the “Enable” option
  • After that go to the ‘Security” option from the same submenu section under the “Wireless” menu section and then enter the below settings.
    • SSID: You have to either select the SSID 1 or SSID 2 which we have setup in the above process.
    • Auth Mode: Select “WPAPSK/WPA2PSK mixed mode”
    • EncryptType: Select “TKIP” from the drop-down options
    • Passphrase: Here enter your password and also make sure that this is at least 8 characters long, then simply click on the Apply button from the above to make the changes.

Finally, we’ve made the wireless connection changes and made the security settings on the Intershop router in about a few minutes which you can do the same by following the above instructions.

Filed Under: 192.168.1.1, Admin, Intershop, Login, Password Change

192.168.250 Omron Router Admin Login Password Change

January 8, 2021 by 192.168.01 Leave a Comment

Omron Router Setup: Omron is not just another Japanese company but it is a huge market leader in different sectors along with Electronics, Mechanical components, and healthcare products as well. Along with all the other products they developed, routers have become an integral part of their Electronic market as the sales have increased due to Internet development.

Fans and users who buy their wireless and wired routers are really happy and always leave raving reviews due to the highspeed performance their products offer. In this article, we will guide you through the process of configuring the Omron router so that you can do it yourself later on.

How to Configure & Setup Omron Router – Omron Router Setup Process

Omron router models might not seem like your everyday routers because this company uses a different interface unlike other modern router companies. But it does not mean that their interface is hard to use but for starters our

  • The Internal IP address is 192.168.250, you have to enter this into the address bar of your browser
  • Then click on the enter button or else press on the go button which will now load the login page
  • On the login window, you can see that username and password are required to be entered
  • For the Login enter admin and for the Password enter 1234 and then click on the login button
Omron Router Admin Login Page
Omron Router Admin Login Page

Then you will have the access to the Omron router admin panel to complete further configuration.

Omron Router Wireless Configuration Guide – Internal Settings

When it comes to the internal settings the most important thing is to enable the wireless settings which is easy to do but for the first time you can follow the instructions below to make sure the settings are done perfectly.

Wi-Fi/Basic Settings: From the left sidebar click on Wi-Fi and then click on Basic and on this page make the settings as per the instructions below.

  • Enable Wireless: Select this option
  • Enable Wireless Multicast Forwarding (WMF): Select this option
  • SSID: Here you can enter a name for your router network
  • Country: Select your country from the drop down options
  • Max Clients: You can enter the number of maximum devices for your router network
  • Then click on the Apply/Save button to make the changes
Omron Router Wi-Fi Basic Settings
Omron Router Wi-Fi Basic Settings

Wi-Fi/Advanced Settings: Click on Wi-Fi from the left sidebar and then click on Advanced and then change the options as shown below.

  • Band: Select “2.4GHz”
  • Channel: Select “Auto”
  • 802.11n/EWC: Select “Auto”
  • Bandwidth: Select “20MHz in 2.4G Band and 40MHz in 5G Band”
  • 802.11n Rate: Select “Auto”
  • 802.11n Protection: Select “Auto”
  • Support 802.11n Client Only: Select “Off”
  • RIFS Advertisement: Select “Auto”
  • OBSS Coexistence: Select “Enable”
  • RX Chain Power Save: Select “Disable”
  • Multicast Rate: Select “Auto”
  • Basic Rate: Select “Default”
  • XPressTM Technology: Select “Disabled”
  • Transmit Power: Select “100%”
  • WMM(Wi-Fi Multimedia): Select “Enabled”
  • WMM No Acknowledgment: Select “Disabled”
  • WMM APSD: Select “Enabled” and then click on Apply/Save button
Omron Router Wi-Fi Advanced Settings
Omron Router Wi-Fi Advanced Settings

Wi-Fi/Security Settings: Click on Wi-Fi from the left sidebar again and then click on Security and make the changes as per the instructions below.

  • Under WPS Setup, Enable WPS: Select “Enabled”
  • Under Manual Setup AP, Select SSID: Select the SSID which you have setup during Wi-Fi/Basic settings
  • Network Authentication: Select “WPA2-PSK”
  • WPA/WPAI passphrase: Enter password for router network and then click on Apply/Save button to make the changes

Once you have followed the above guide then you can configure the Omron router easily.

Filed Under: 192.168.250, Admin, Login, Omron, Password Change

192.168.1.1 ACCTON Router Admin Login & Password Change

January 8, 2021 by 192.168.01 Leave a Comment

Accton WiFi Router Admin Login Password Change Setup Guide: Accton which is better known as Accton Technology corporation is a giant Taiwanese company that is in the field of the electronics industry with more than 5200 employees across the world. The primary focus of the brand is to build and create networking and communication service-related tools and most of them are Accton router which is known for its durability and high speed.

Accton Technology has produced a lot of routers out there and among those, I would say MR3200 series is the finest one and has sold more than any other series.

When you buy a new router then it might take some time to understand the configuration and setup process but not anymore. Before we continue to the setup you must connect the ethernet cable from the broadband modem to the Accton router which will enable the Internet power supply.

And then connect the power supply to the router, next connect the ethernet cable from the desktop or laptop to the router ethernet cable port. You can see the Accton Router MR3201A settings and the hardware connection for your reference while making the changes.

Accton Router Setup
Accton Router Setup

How to Install Accton Router – Accton Router Setup Configuration Guide

In this article, we will show you how you can configure the Accton router yourself and make the configuration correct. We will be using the Accton MR3201A router which has been selling well and all other models are almost the same as of this model.

  • Step 1: Accton Router Default IP Address
    • The IP address is the Internet Protocol address or the common IP address which we will use to login to the Accton router admin panel. The default IP address for this router is 192.168.1.1 which you have to enter into the browser’s address bar.
192.168.1.1 Router Admin Login
192.168.1.1 Router Admin Login
  • Step 2: Accton Router Default Username and Password
    • Once you have entered the IP address in the browser’s address bar you will be asked to login to the admin panel by entering the username and password in the popup that will appear.
    • Below are the Accton router’s default username and password which we will have to enter into the sign in popup.
192.168.1.1 Admin Login (User Name & Password)
192.168.1.1 Admin Login (User Name & Password)
  • Step 3: Once we have entered the details, the Accton router admin page will appear through which we have to make the configurations and settings.
  • Step 4: We have to click on “Networks” under configuration option, then go to “Wi-Fi” option and click on the Enable button
192.168.1.1 Accton WiFi Router Properties
192.168.1.1 Accton WiFi Router Properties
  • Step 5: Next we will have to select the “Network Security” option from the left sidebar in the configuration section. Here we will have to select the type of encryption, which will be WPS – WPS2.
  • Step 6: Under the same page we will have to enter the password in the “Password” and make sure that the password should be more than 8 characters long.

Default Username (Admin) and Password for Accton WiFi Router

BrandModelProtocolUsernamePassword
ACCTONWIRELESSROUTER Rev. T-ONLINEHTTPnone0
Accton Router Default Username and Password

In this way, you will be able to change the Accton Router settings very easily and make sure you have a proper password to protect the router’s Wi-Fi access.

Filed Under: 192.168.1.1, Acction, Admin, Login, Password Change

192.168.0.1 Marconi Router Admin Login and Password Change

January 8, 2021 by 192.168.01 Leave a Comment

Marconi Router Setup: Marconi wireless and wired router have gone trendy over time and they started as the traditional unit of the wired router but they have slowly picked up the pace becoming a prominent router company in the world.

Similar to any other router, even this brand has released a lot of router models but this brand has updated each and every router to the very best from scratch that makes the present models the best in terms of quality and features as well. Marconi router model X7721r is the most famous one across all the other models that have been released in the market till now.

Marconi Router Admin Login and Password Change
Marconi Router Admin Login and Password Change

How to setup Marconi Router – Marconi Router Configuration Process

We will be using the model X7721r in order to show you the router configuration process, since all other router models under this brand follow the same interface as well. So, make sure you have made the hardware connections properly and then continue with the below instructions.

  • Step 1: First open the browser and then enter the IP address 192.168.0.1 in the address bar, then click on the continue button or either the go button
  • Step 2: This will now load the router login panel, where you will have to enter the required login information.
  • Step 3: The username and the password will be both unknown, which entered, you have to click on the login button and this will give you access to the admin panel.
Marconi Router Admin Login Page
Marconi Router Admin Login Page
  • Step 4: Now go to the Wireless setup from the left sidebar and then click on the Basic tab from the top menu and then make the below suggested changes.
    • Band: Select “2.4 GHz (B+G+N)” from the drop-down menu
    • Mode: Select “AP” from the drop-down options
    • Network Type: Do not select anything here
    • SSID: You have to enter your router network name and this can be as per your own preference
    • Channel Width: Select “20MHz” from the drop-down menu options
    • Control Sideband: Do not make any changes here
    • Channel Number: Select “11” from the drop-down menu options
    • Broadcast SSID: Select “Enabled” option from the drop-down menu
    • WMM: Do not make any changes here
    • Data Rate: Select “Auto” option from the drop-down menu and click on the save button.
Marconi Wireless Basic Settings
Marconi Wireless Basic Settings
  • Step 5: Now go to the Advanced from the top menu after selecting the Wireless setup from the left sidebar, then you have to make the changes as per the instructions below.
    • Fragment Threshold: Enter “2346” here
    • RTS Threshold: Enter “2347” here
    • Beacon Interval: Enter “100” here
    • Preamble Type: Select “Long Preamble”
    • IAPP: Select “Enabled” here
    • Protection: Select “Disabled” here
    • Aggregation: Select “Enabled” here
    • WLAN Partition: Select “Disabled” here
    • STBC: Select “Disabled” here
    • 20/40MHz Coexist: Select “Disbaled” here
    • RF Output Power: Select “100%” and finally click on the ok button which will save all the settings.

In this way anyone will be able to configure the Marconi router in quick 5 minutes and all they have to do is follow the above instructions carefully.

Filed Under: 192.168.0.1, Admin, Login, Marconi, Password Change

10.0.0.1 Aethra Router Admin login & Password Change

January 8, 2021 by 192.168.01 Leave a Comment

Aethra Router Setup: One of the brands that has been Solley focused on creating WAN routers for small house to large scale offices that define the networking in modern world. Aethra understands that with modern development, the routers have to be upgraded as well to match the quality of speed and bandwidth usage users are expecting.

They have created a variety of routers that have really amazing features while one of the unique and understandable being the routers can support up to 600 Mbps which is a huge mark.

When you look at your ally, the Broadband network service providers have equipped their servers with high speed Internet and more bandwidth usage is being allotted to everyone.

In order to make sure the users are capable of utilizing the ultrafast and growing speed, performance and bandwidth Aethra has created some of the robust routers of all times.

10.0.0.1 AETHRA Router Admin Login Password Change
10.0.0.1 AETHRA Router Admin Login Password Change

In this article we will be first taking a look at simple hardware connection steps for the Aethra router and then acknowledge the internal installation steps with use of Default IP address, username and password.

How to Setup Aethra Router – Aethra Router Configuration Process

Hardware Connection:

As you can see in the below image, we will follow the same instructions which I have mentioned below:

  • Ethernet Connection: The Broadband service ethernet cable will be connected to the Aethra router, which will enable transmission of the Internet from the Broadband service provider modem to your router.
  • Power Supply for Router: Your Aethra router will come up with a power unit that needs to be properly plugged in.
  • Connection to Laptop or Computer: From your router, you will connect an ethernet cable from the router port to the laptop or computer’s ethernet input port.

Software Instructions – Wi-Fi Enable, Default IP Address, Username and Password

Aethra Router Software Indtructions
  • The first step is to go to the Default IP address from your browser which is 10.0.0.1:53920
  • After entering the default IP address into the browser address bar, you will have to log in with the username and password
10.0.0.1 Admin Login
10.0.0.1 Admin Login
  • Aethra routers have the same default username and password for all the routers mode, where username is “anything” and the password is “blank”
  • Enter the username and password into the login box, then click on ok button to continue which will now login to the router panel

Connect Aethra Device to Laptop/Computer

  • Once you have entered the login information, you will be shown “Aethra – Star Manager” where you will have to click on “Turn on the device” which will begin to connect the router to your laptop or computer
10.0.0.1 Aethra Router Configuration
10.0.0.1 Aethra Router Configuration
  • Next step you will be taken to “LAN” page where you need to enter the default IP address and subnet mask which will auto populate (It will appear itself). Then click on “Enable” option under the DHCP server and click on Next button
10.0.0.1 Lan Setup
  • Last step will be “WAN” section, where you have to select an option under “Encapsulation” from the drop-down menu and you need to select “PPP over Ethernet (PPPoE)” and then click on next button.
Aethra WAN PPP Over Ethernet Setup PPPoE
Aethra WAN PPP Over Ethernet Setup PPPoE

Now you have completely configured your Aethra router!

Default Username and Password for AETHRA WiFi Router Admin Login & Password Change

BrandModelProtocolUsernamePassword
AETHRASTARBRIDGE EUHTTPadminpassword
Aethra Router Default Username & Password

Filed Under: 10.0.0.1, Admin, Aethra, Login, Password Change

192.168.0.1 or 192.168.1.1 TP-Link Admin Login & Password Change

January 7, 2021 by 192.168.01 Leave a Comment

TP-Link Router Setup: When you talk about World class router service, then the first name that comes to your mind is TP-Link which is a Chinese brand but they are among the top router companies in the world. This company is famous for producing wireless routers, modems, ethernet cables, and many other products for homes and businesses to make the Internet easier to use.

They have a wide range of products as they are focused on creating new products with better features every time and this is one of the reasons why this company has so many reviews and all their products are known for their speed performance moreover.

Find out how to setup & Configure TP-Link Router – Step by step process

So if you own a router from TP-Link then you need to learn how it can be configured, i.e, how someone with no experience can set up the router from scratch. All the routers from TP-Link are very easy to configure and you can follow the instructions below to learn how to configure the router directly.

Step 1: Open your browser and then type in tplinkwifi.net (192.168.0.1 / 192.168.1.1) and then click either the enter button or press on going option to load

TP-Link Admin Login Portal
TP-Link Admin Login Portal

Step 2: Then you can see that the login window will appear on the screen now and here you have to enter the username and password as admin & admin respectively and then click on “Let’s Get Started” option to continue

TP-Link Admin Login Interface
TP-Link Admin Login Interface

Step 3: In the next page you will be asked to select the Time Zone, select your time zone from the drop down options and then click on the next button

TP-Link Router Quick Setup Time Zone
TP-Link Router Quick Setup Time Zone

Step 4: On the next page “Internet Connection Type” you will have to click on “Dynamic IP” option and then click on the next button to continue forward in the configuration process

TP-Link Router Internet Connection type
TP-Link Router Internet Connection type

Step 5: Under Quick Step, in the next page you have to select “Do Not Clone MAC Address” option and then click on the Next button to continue

TP-Link Router Quick Setup Clone or do not Clone Mac Address
TP-Link Router Quick Setup Clone or do not Clone Mac Address

Step 6: Next Page is Wireless Settings, under this page you have to make the all the below shown settings.

  • 2.4GHz Wireless: Check “Enable Wireless Radio” option
  • Network Name (SSID): Enter a router network name here as per your preference
  • Password: Enter a password for your router
  • 5GHZ-1 Wireless: Even here you have to select the option “Enable Wireless Radio” option
  • Network Name (SSID): Enter a new router network name here
  • Password: Enter a new router network password here
  • 5Ghz-2 Wireless: Even for this you have to check “Enable Wireless Radio” option
  • Network Name (SSID): You will have to enter a separate router network name here
  • Password: Enter a password for this router network here and then click on the next button
TP-Link Router Wireless Settings
TP-Link Router Wireless Settings

Step 7: On the next page of summary you have to review if all the details are correct and then click on the save button

TP-Link Router Quick Setup Summary
TP-Link Router Quick Setup Summary

Step 8: Finally you have now configured the router and then you can login or log out from your router and check that wireless setting is enabled for your router.

TP-Link Router Cloud Services
TP-Link Router Cloud Services

And in this way you can easily configure any TP-Link router from scratch!

Filed Under: 192.168.0.1, 192.168.1.1, Admin, Login, Password Change, TP-Link

« Previous Page
Next Page »

IP 192.168.0.1 © We are not responsible for any mistakes in the content in this website for any enquires please read Privacy Policy| Disclaimer – User Agreement | Contact Us |