192.168.0.109

192.168.0.109 Onixon Router Admin Login Password Change

May 9, 2020 by 192.168.01 Leave a Comment

Onixon Router Setup: Onixon might be a router company that you may not have heard much but it is quite a popular router company which deals with different router models that have both 2.4Ghz and 5.0Ghz dual band frequencies which has become a huge trend so as to improve the speed performance of their routers. To the contrary, their prices for all the models are quite normal. That is one good option for reasonable pricing. Along with those features, there is another good feature which is proper and effective usage of bandwidth of the Internet supply makes the router top notch to use.

How to Configure Onixon Router from start – Onixon Router Setup Process

Now that you have made the hardware configuration of the router, then it is time for you to follow the router configuration from below in order to make the settings properly.

IP Login Process: We will be using IP address 192.168.0.109 to log into the admin panel

Step 1: Open the browser and then enter the IP address 192.168.0.109 into the browser’s address bar
Step 2: Then click on go or else the enter button, this will load the login window where you need to enter the username and password
Step 3: To continue forward, you have to enter, admin for username and 1234 for password, then click on login button

Onixon Router Login IP Address (192.168.0.109)

Onixon Router Wireless Configuration Process – Internal Settings

Now that you have access to the Onixon router admin panel through which you can complete the web configuration panel from following the below instructions.

Wireless Settings: Click on SETUP option from the top of the menu section and then click on WiFi Settings from the left sidebar and then you have to make the changes as per the settings below.

Enable SSID Broadcast: Select this option
Enable Wireless Isolation: Select this option
Name (SSID): Enter a name for your router network here
Region: Select your region or country from the drop down option
Channel: Select “Auto” option
Mode: Select “Up to 54Mbps” option
Under Security Options, select “WPA2-PSK[AES]” option
Password: You can enter the password for your router network here and then click on Apply button on top of the page

Advanced Wireless Settings: Click on ADVANCED option from the top menu section and then click on WiFi Settings and under this click on Advanced Wireless Settings. And on this page you have to make the settings as per the instructions below.

Enable Wireless Router Radio: Select this option
Enable 20/40 MHz Coexistence: Select this option as well
Enable Wireless Isolation: Select this option
Enable SSID Broadcast: Select this option as well
Enable WMM (Wi-Fi multimedia) settings: Select this option
Fragmentation Length(256-2346): Enter “2346”
CTS/RTS Threshold (1-2347): Enter “2347”
Preamble Mode: Select “Automatic” option
Transmit Power Control: Select “100%” option
Turn off wireless signal by schedule: do not select this option and then click on Apply button to make the settings

Finally once you follow all the above instructions then you would easily be able to configure the Onixon router.

192.168.0.109 Latis Network Router Admin Login Password Change

April 2, 2020 by 192.168.01 Leave a Comment

Latis Network Router Setup: They are one of the largest wholesale computer networking and computer peripherals solutions companies which is well known all across the world. You might have seen a lot of different computer gadgets from them but they are also well known for creating cloud services such as hosting, security services, firewalls and more. But the main product which we are discussing today is about their router brand which has been received well by the fans and the users which is really an interesting thing. Effective router costs while providing valuable performance such as speed, bandwidth usage has been an amazing aspect to look into.

Latis Network Router Admin Login Password Change

How to Configure Latis Network Router – Latis Network Router Setup Process

Hardware settings and cable management should be corrected assembled before you get into the below instructions, so that you will not face any internet connectivity problems later on. Once done, you can get right into the below guide.

Step 1: First the Internal IP address for the Latis Network is 192.168.0.109, open your browser and then go to the address bar. Next type or enter the IP address 192.168.0.109 into the address bar and click on the enter or the go button
Step 2: Wait a few seconds and you will see that there is a login popup showing up which will ask you to enter your username and the password as the login information. Enter the required details, as username is admin and the password will also be admin.

Step 3: Then click on the login button and then wait a minute which will now load the Latis Network router admin panel through which further configuration can be done.
Step 4: Now go to the System option from the top menu section and under this select the “WAN” option and you have to make the below said changes.
- Internet Connection Type: Select “Dynamic IP” option from here
- Dynamic IP, Hostname: Do not enter anything here and leave it blank
- DNS: Select “No Default DNS Server”
- MAC Clone: Select “Keep Default MAC Address” option here and finally click on the save button to make the changes.

Step 5: Now go the “Wireless” option from the top menu section and then select the “General Setup” option under this and we have to make the changes for the Wireless Setup.
Band Mode: Select “802.11 a” option from the drop-down menu
Country: You can select your preferred country or else keep as None as well
Tx Power: Enter “100” here and click on save to make the changes.

Latis Network Wireless General Configuration

Step 6: Now go to the “Advanced Setup” under the Wireless section and the make the changes as below instructions.
- Fragment Threshold: Enter “2346” here
- RTS Threshold: Enter “2346” here
- Short Preamble: Select “Enable” option here
- Tx Burst: Select “Enable” option here
- WMM: Select “Disable” option here and click on save button

Step 7: Now go the “Setup Profile” option under the Wireless and make the below said changes.
- Profile Name: Enter any name for the profile
- ESSID: Enter your router network name here
Policy: Select “None” option here and finally click on the save button to make the changes.

192.168.0.109 JD Edwards Router Admin Login Password Change

April 2, 2020 by 192.168.01 Leave a Comment

JD Edwards Router Setup: JD Edwards a part of the Oracle is a very famous but costly router brand and has been a part of the commercial side of business for large scale organizations over the period of time. The router integration with the Oracle management system has been a huge success, because the sales went high and both the products have been sold together. Similar to any other router brand model, JD Edwards is popular for the reason that it is durable.

Andis well known to have the finest features that can make your experience great speed performance while effectively using broadband. They released a model with the name worldvision which has become quite popular and on basis of that model, we will be going over the informative article.

JD Edwards Router Admin Login Password Change

How to setup JD Edwards Router – JD Edwards Router Configuration Process

JD Edwards, also known as JDE a part of the Oracle, has a simple interface because it is used by millions of people all across the world. We will go over the steps required for you to configure the router from the scratch.

Router Admin Page Login Process: Before you go into the setup, you will have to get access to the admin panel and you can follow the instructions for that from below.

First open any browser and then type the IP address 192.168.0.109 into the address bar and then click on the go button. Make sure the browser from laptop or the computer is connected to the router via the ethernet cable port.

After that in a few seconds, you will see that the admin panel login page will now popup on the screen which will ask for username and password details to be filled. Here enter the username and the password, both of them as “JDE” and once done click on the login button which will grant you access to the admin panel.

Router Internal Configuration Process: We have the access to the admin panel right now and next step would be to get the configuration done which is quite simple if you follow the instructions below properly.

Go to Connection Type, under the Internet Wan from the left side bar and here you have to select the “Dynamic” option and then click on the next button and save the settings.

After that go to the “Wireless” section from the left sidebar and then you will be asked “Enable or Disable wireless Functionality” here select the ‘Enable” option and then click on the Apply Changes button.

Next go to the Channel and SSID option under the Wireless section from the left sidebar and then make the below necessary changes.
- SSID: Here you have to enter your router network name and this can be as per your preference
- ESSID Broadcast: Select “Enable’ option here
- Wireless Mode: Select “Mixed (11b+11g)” option from the drop-down menu
- Wireless Channel: Select “Auto” option from here
- Extend Range: Select “Disable” option here
- Protected Mode: Select “Auto” option from the drop-down menu
- Turbo Mode: Select “Disable” option here and click on the “Apply Changes” option

192.168.0.109 Inchon Router Admin Login Password

February 18, 2020 by 192.168.01 Leave a Comment

Inchon Router Setup: Do you like to use a robust router to have great speed performance and also effective usage of bandwidth then using the Inchon router is the best option for you. They might not be one of the best industry-oriented router brands but they are still worth the dime due to their dual gain bandwidth feature that is really flexible to use and has increased sales a lot for that reason alone.

One of the aspects has been that they have not released many products that were a part of their robust product building strategy that is sure has taken a revamp. We will be discussing the configuration for the Inchon router that you might need today.

192.168.0.109 Inchon Admin Login Password Change

How to configure Inchon Router Setup – Inchon Router Configuration Guide

Inchon router has a quite simple interface that would come in handy while configuring the router precisely and we are going to look into how it’s done here.

Step 1: The internal IP address for this service is 192.168.0.109, which you have to enter into the address bar of the browser and click enter

Step 2: Now a popup will appear asking to login with your username and password, then remember both the details are “admin” only and enter them. Then click on the login button at the bottom to continue.
Step 3: We will wait for 1 minute or so because the admin panel will start loading here and once it is loaded, we can start working on the configuration.

Let us move towards the internal configuration and settings of the router below.

Step 4: Then we have to go to “Wireless” on the top from the menu section and then select “Basic” from the left sidebar and make the below basic settings.
- Enable Wireless: Check the option here
- Mode: 802.11BGN, from the drop-down menu
- Band Width: Select 20/40 MHZ from the drop-down menu
- Rate: Auto to be selected, Mbps
- Power: Select 100% here
- Current Country: You need to select your country from here
- Channel: Select 11 from the drop-down menu and then click on the submit button for changes to be saved.

Step 5: Now go to “SSID” and here you have to select the first “SSID” and then change the name by clicking on the edit button. This is the router name which will be shown while searching online. Then click on the Save button at the bottom and the settings for SSID will be saved.

Step 6: Now go to the “Advanced” option and then we have to make the below said configurations and settings.
- Beacon Interval: This should be 100
- RTS/CTS Threshold: This will automatically update itself
- Fragment Length: This will also automatically update itself
- DTM: Here you have to enter 1 and then click on the submit button for one final time which will save the settings you have made.

Thanks for reading this guide about the configuration process about the Inchon router and you can now get access to a wireless connection as well.

192.168.0.109 Flowpoint Router Admin Login Password Change

February 1, 2020 by 192.168.01 Leave a Comment

Flowpoint Router Setup: There are quite a few good routers under this brand that have received raving reviews all across the world. And it is one of the reasons why we are writing about this brand and discussing it because it has made good routers across time that are great at speed performance.

Previously they have also released the dual gain bandwidth router which will help users to effectively use the Internet which has more bandwidth as well.

Some of the router products which we’ve liked form the Flowpoint are 100 IDSN, 22000 SDSL, 40 IDLS, DLS, DSL 2000. One of the key factors is that all the products from this brand have the same web configuration panel and comes with the same default username and the password as well.

Flowpoint Networks Router Admin Login Password Change

How to Setup Flowpoint Router – Flowpoint Router Configuration Process

Flowpoint router is an exceptional brand across the world and that is why we are going to show you the process to configure the router from the very beginning.

The default internal IP address for Flowpoint router is 192.168.0.109
Enter the above IP Address which is 192.168.0.109 into the browser’s address bar and then click enter to continue
Please make sure that the browser is primary and the laptop or the computer being used is connected to the router via an ethernet cable connection

After that, in a bit, we will see a popup appearing on the same windows and it will ask for login details to be entered.
Here, enter the login details for Flowpoint router which is the admin for the username and for the password it is admin as well, click the login button and it will give you access to the admin panel!

We can see two main sections on the left sidebar of the admin panel which is “Device Management” and then “Network”.

Click on the Network section from the left sidebar and then we need to configure the wireless connection settings.
- Go to WAN Settings under the Network section which we have just clicked on and follow the below settings properly.
- Connection Type: PPPoE, you have to select this option from the drop-down menu
- Username: Make sure to enter a username for the router which you can access from
- Password: You need to enter a password here
- Dial Mode: You need to select “Auto” from the drop-down menu
- WAN Rate Settings: You need to select “Auto Negotiation” from the drop-down menu
- Once the settings have been done, then click on the Save button for the settings to take place.

Then go to Wireless section from the Network sidebar and then make the below settings for the wireless connection and the password to work.
- SSID: Router name should be entered here
- Wireless Connection: Enable option should be selected here
- Passkey: We need to enter the overall router network password here
- Connection Type: WPA-PSK option should be selected here

Once you are done with the above settings then simply click on the Save button and the router will make the changes itself.

Model Wise Flowpoint Networks Router Username and Password for Admin Login & Password Change

Brand	Model	Protocol	Username	Password
FLOWPOINT	2200 SDSL	TELNET	admin	admin
FLOWPOINT	DSL	TELNET	n/a	password
FLOWPOINT	100 IDSN	TELNET	admin	admin
FLOWPOINT	40 IDSL	TELNET	admin	admin
FLOWPOINT	FLOWPOINT DSL	(none)	admin	admin

192.168.0.109 Funk Software Router Admin Login Password Change

January 31, 2020 by 192.168.01 Leave a Comment

Funk Software Router Setup: Funk Software is a United States based company that primarily focuses on the Network and Access security solutions for all types of households and commercials use as well. They also focus on the WLAN security and the router products which users across the world really like. Most of their routers follow the same pattern of web configuration panel and even the default login details are the same for all of them.

In that aspect, users have preferred this brand routers for the reason as they are quite high performing ones with the speed that excels all other brands. Meanwhile, their latest range of products has both the better effective bandwidth allocation and utilization features that have made the Funk Software a great brand to get routers from.

Funk Software Router Admin Login Password Change

How to setup Funk Software Router – Funk Software Router Configuration Guide

Funk Software is a famous brand and there are a lot of people who use their routers and for those people here is the guide to setup their routers perfectly. We will have to make sure that the router hardware setup is properly done before we move with the below instructions.

First, you will open a browser and then enter the IP address which is 192.168.0.109 into the address bar. (You can select any browser and make sure that the browser is from a laptop or computer connected to the router directly via the ethernet port)

Now the second part is where we have to enter the login details as soon as the login popup will appear on the page.
Under the username enter admin and under the password enter radius, and then click on login which will now log into the admin panel.

In a quick couple of minutes, we will have the access to the web configuration panel from the admin panel and you need to follow the below instructions to complete the configuration.

So first we need to click on the Networks under the Wireless Networks section and here the below settings have to be made for wireless connection to work.
- Name: You have to enter the router name here and it will be your network name as well
- Purpose: You need to select WAN since this is for Wireless Area Network
- After that under the IPV4 for connection type, select “Using DHCP” from the drop-down menu
- Similarly, under the IPV6 for connection type, select “Disabled” from the drop-down menu
- Lastly, under Common Settings, for DNS servers enter 72 for both and then finally click on the Save button for the settings to be saved.

Then go to the Routing and Firewall section from the left sidebar where we will have to select the password section and enter a password for the router to be accessed from.
Then go to the Wireless Networks from the very top and then click on the enable button for the Wireless network to be enabled and click on the Save button

In a matter of quick minutes, you will now be able to setup the Funk Software router.

Default Username and Password for Funk Software Router Admin Login Username and Password

Brand	Model	Protocol	Username	Password
FUNK SOFTWARE	STEEL BELTED RADIUS Rev. 3.X	PROPRIETARY	admin	radius