192.168.0.113 Kalatel Router Admin Login Password Change

Kalatel Router Setup: Kalatel is a router brand very famous in the easter Europe with a variety of brand models hovering all across the world. They come with dual gain bandwidth allocation and speed performance features that have made fans love using these routers. At the same time being available at reasonable costs has also made such a difference.

How to setup Kalatel Router – Kalatel Router Configuration Process

If you are done with the hardware settings, then you can follow the below steps to setup the router.

• First open the IP address 192.168.0.113 into your browser
• Then enter the username and the password as “admin” and “3477” respectively, then click on login to continue.

Wireless Configuration for Kalatel Router

Now, since you have access to the router admin panel now it is time for you to go over the setup process which will basically help you to configure the wireless connection.

Basic – Wireless: Here go to the “Wireless” section and then select “Basic” option from the left side bar and then click on that option, then you will see the settings option and make the changes as shown below.

• Enable Wireless: Select this option
• SSID: As we all know, this is your router network name and you have to enter the name here which can be as per your preference.
• Country: This should be selected as per the country you are in, you can find all the countries from the drop-down menu option.
• Max Clients: 5 is a good number to be put here, but you can have any number of clients or the users that can use the wireless connection at a single time as per your own preference
• Then click on the Apply/Save button which will complete the basic wireless configuration

Advanced – Wireless: Now go to the Advanced settings under the wireless section and then make the necessary changes as suggested below.

• Band: Select “2.4GHz” option from the drop-down menu
• Channel: Select “Auto” option from the drop-down menu
• Bandwidth: 20MHz in both Bands
• RIFS Advertisement: Select “Auto” option here as well
• Multicast Rate: Select “Auto” option here
• Basic Rate: Select “All” option from the drop-down menu options
• Then do not change the options or settings for all other options, and simply click on the Apply/Save button at the bottom of the page.
• Security – Wireless: Now the main aspect of the wireless setting is that we have to make sure that the security and passwords are set up fine as per the below instructions.
• Enable WPS: Select “Disbaled” option here
• Select SSID: Select any of the SSID or the SSID we have setup in the above process to assign a password from the below

Security – Wireless: Let us configure the security settings as per below instructions.

• Enable WPS: Select “Disbaled” option here
• Select SSID: Select the SSID we have setup above, and we will assign a password to it from below steps.
• Network Authentication: Select “WPA2-PSK” option here
• WPA/WAPI Passphrase: Enter the password here
• WPA Group Relay Interval: Enter “0” here
• WPA/WAPI Encryption: Select “TKIP+AES” option
• WEP Encryption: Select “Disabled” option and then click on the Apply/Save button for the changes to take place.