192.168.1.1 Breezecom Router Admin Login Password Change

Breezecom Router Setup: Breezecomis a well-known service provider that has got multiple models of Router. To access the router admin page to configure the wireless network you need to login Breezecom page using the default IP address. There is an IP address assigned to every router such that to access the modem page and let the user configure.

There are default Username and Password assigned to every model by its brand to access for the first time. This credential needs to be changed once you access the Admin page using the default Login Credentials.

Breezecom Router Cable Setup:

The network has to get into Wi-Fi mode using your newly bought Breezecom router. So, to do this you need to setup the Cable between the modem and Computer. So, follow the below steps to make complete Hardware setup and let you access the Admin page using the IP address.

• Firstly, get the LAN internet connection to the place your router modem is placed
• Now insert the LAN data connection into input slot of modem
• Use the output slot of the Router and connect it to PC or Laptop Ethernet port using cable
• Switch on the power supply and wait for the lights to blink three times
• Click on Browser and search for IP address to open the Login Page of Router

That’s it! Hardware Cable Setup of the router has been done and now you can follow bellows steps to configure the modem.

Breezecom Router Wireless Network Setup – 192.168.1.1

This is how you configure the Wireless network using your Breezecom router Admin page. Do follow the steps written below to configure the Wi-Fi settings by providing all the required details.

• Login to the Admin page of Breezecom Router through modem IP address 192.168.1.1
• Use Login credentials that you have changed to get into the Home page
• Click on Wireless option shown at the top corner of the screen
• Then Click on Basic Wireless Settings and click on Enter Name
• Fill your desired name in the first column and then select SSID password to setup
• Select the Bandwidth and WAP2 password protections to secure Wireless network
• Click on SSD to enable and then Save Button from the bottom of page

That’s it! Breezecom Router Wireless setup has been successfully done and you can now access Wi-Fi Network from your movable devices.

How to Access Breezecom Router Wi-Fi:

There are steps that need to be followed while connecting to the wireless network provided through the Breezecom modem. Any smartphone or Laptop wanted to connect to an Internet data connection must follow the below steps.

• Firstly, make sure the Breezecom router setup with LAN data wire is connected
• Switch ON the router and view the lights blinking on modem
• Now open the Wi-Fi option in Laptop or Smartphone and let it search
• Tap on your Wi-Fi name displayed and then enter the password required
• Click on the Save button and then wait for Authentication to accept it

That’s it! You’re Laptop or Smartphone is now connected with the Wi-Fi network provided through Breezecom router and thus your data LAN connection is now accessible over the air. If you don’t save the password, then overtime you access the network password must be entered for protection.

Breezecom Networks Router Default Username and Password for Admin Login in Model Wide

Brand	Model	Protocol	Username	Password
BREEZECOM	BREEZECOM ADAPTERS Rev. 3.X	(none)	n/a	Master
BREEZECOM	BREEZECOM ADAPTERS Rev. 2.X	(none)	n/a	laflaf
BREEZECOM	BREEZECOM ADAPTERS Rev. 4.4.X	CONSOLE	n/a	Helpdesk
BREEZECOM	BREEZECOM ADAPTERS Rev. 4.X	(none)	n/a	Super
BREEZECOM	BREEZECOM ADAPTERS Rev. 3.X	(none)	n/a	Master
BREEZECOM	BREEZECOM ADAPTERS Rev. 2.X	(none)	n/a	laflaf